SOURCE: 91 yamaha fzr engine turns but wont start
the floats in the carb are stuck. you can try lightly tapping on the carb with a screwdriver that should do the trick.
SOURCE: Yamaha V-Star 1100 Custom stalls when downshifting
sounds more like a fuel problem to me. is it cold there did you use stabilizer in the gas? try some berrymans B12 in the gas it cleans everything up internally. it worked for me
SOURCE: I have a 2007 Yamaha Grizzly 660. It was running
It sounds like you got some corrosion going on, on the ground side. I would start with the battery cables first and see if they need cleaned up, then go to the connectors and unplug them and clean if necessary and put die-electrical grease in the sockets of the connectors before plugging them back in. I am assuming that the shifter is electrically assisted if there are problems going on with it as well...this is what makes me believe that it is a bad ground due to setting maybe in a damp inviroment.
Testimonial: "Great feedback and it has given me a different avenue to look that I had not thought of. The response was quick and not only did ?lylerwh? provide the direction to look he furthered explained what his decision was based on. Thanks "
SOURCE: 2006 yamaha yz 250f starting problems
You may be having trouble with a sticking intake valve. Remove the valve cover and spray some WD-40 onto the valve and spring. Try to operate the valve with your fingers to work it loose. Once the engine starts running, it should improve. You may need to change the oil. Good luck.
36 views
Usually answered in minutes!
×