Question about 2007 Yamaha XT 125 R

1 Answer

How do I adjust my clutch cable xt125r - 2007 Yamaha XT 125 R

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Yamaha Master
  • 60,967 Answers

Hi, Www_burkey12 for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
How to adjust motorcycle clutch cable
Adjusting clutch cable
Yamaha xt 125 service manual
OEM parts for Yamaha
http://gigi600.altervista.org/immagini/xt125r/XT%20125%202005_service.pdf http://gigi600.altervista.org/immagini/xt125r/XT%20125%202005_service.pdf
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on Apr 25, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Yamaha xt 125 r eletricts not working


Hi, Anonymous and the usual suspects are:
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Discharged battery, needs to be 12.5 volts or better and be able to pass a load test if necessary, check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Bank angle sensor tripped and ignition/light key switch not cycled to the "OFF" position and then back to the "ON" position.
5. Faulty ignition switch.
6. Faulty starter button.
7. Faulty kickstand or clutch pull in switch/sensor.
8. Security alarm needs a reset.
9. Starter control circuit, relay, or solenoid faulty.
10. Main fuse or circuit breaker may be blown or faulty.
11. Electric starter shaft pinion gear is not engaging or over-running starter clutch slipping.
For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have nice a day.
https://yamahaclub.com/forums/topic/23301-yamaha-xt-125-r-starting-problems
Xt125r wont start
Dirt Rider Magazine
YAMAHA XTZ 125K Owner Manual
http://gigi600.altervista.org/immagini/xt125r/XT%20125%202005_service.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 13, 2016 | Yamaha XT 125 R Motorcycles

1 Answer

How to adjust clutch inside primary case?


Because the clutch cable adjuster clearance increases with engine temperature, adjust
the clutch when the engine is cold. If the clutch is adjusted when the engine is hot, insufficient pushrod clearance can cause the clutch to slip.
1. Remove the clutch mechanism inspection cover and
quad ring
2. Remove the clamp and slide the rubber boot off the clutch in-line cable adjuster.
3. Loosen the adjuster locknut and turn the adjuster to provide maximum cable slack.
4. Make sure the clutch cable seats squarely in its perch at the handlebar.
5. At the clutch mechanism, loosen the clutch adjusting screw locknut and turn the adjusting screw clockwise until it is lightly seated.
6. Squeeze the clutch lever three times to verify the clutch balls are seated in the ramp release mechanism located behind the transmission side cover.
7. Back out the adjusting screw counterclockwise 1/2 to 1 turn. Then hold the adjusting screw and tighten the locknut to 72-120 in.-lb.(8-14 N•m).
8. Once again, squeeze the clutch lever to its maximum limit three times to set the clutch ball and ramp release mechanism.
9. Check the free play as follows:
a. At the in-line cable adjuster, turn the adjuster away from the locknut until slack is eliminated at the clutch hand lever.
b. Pull the clutch cable sheath away from the clutch lever, then turn the clutch cable adjuster to obtain the clearance gap
c. When the adjustment is correct, tighten the clutch in-line cable locknut and slide the rubber boot over the cable adjuster.
10. Install the clutch inspection cover quad ring onto the primary chain case cover.
11. Install the clutch inspection cover and tighten the screws to 84-108 in.-lb. (9.5-12 N•m).

Jul 23, 2014 | 2000 Harley Davidson FXDWG Dyna Wide Glide

1 Answer

After a gear oil change how do i adjust the clutch


Because the clutch cable adjuster clearance increases with engine temperature, adjust
the clutch when the engine is cold. If the clutch is adjusted when the engine is hot, insufficient pushrod clearance can cause the clutch to slip.
1. Remove the clutch mechanism inspection cover and
quad ring
2. Remove the clamp and slide the rubber boot off the clutch in-line cable adjuster.
3. Loosen the adjuster locknut and turn the adjuster to provide maximum cable slack.
4. Make sure the clutch cable seats squarely in its perch at the handlebar.
5. At the clutch mechanism, loosen the clutch adjusting screw locknut and turn the adjusting screw clockwise until it is lightly seated.
6. Squeeze the clutch lever three times to verify the clutch balls are seated in the ramp release mechanism located behind the transmission side cover.
7. Back out the adjusting screw counterclockwise 1/2 to 1 turn. Then hold the adjusting screw and tighten the locknut to 72-120 in.-lb.(8-14 N•m).
8. Once again, squeeze the clutch lever to its maximum limit three times to set the clutch ball and ramp release mechanism.
9. Check the free play as follows:
a. At the in-line cable adjuster, turn the adjuster away from the locknut until slack is eliminated at the clutch hand lever.
b. Pull the clutch cable sheath away from the clutch lever, then turn the clutch cable adjuster to obtain the clearance gap
c. When the adjustment is correct, tighten the clutch in-line cable locknut and slide the rubber boot over the cable adjuster.
10. Install the clutch inspection cover quad ring onto the primary chain case cover.
11. Install the clutch inspection cover and tighten the screws to 84-108 in.-lb. (9.5-12 N•m).

Jul 12, 2014 | 2003 Harley Davidson XL 1200 C Sportster...

1 Answer

Adjust clutch on 06 flhrci


Loosen clutch cable (if not hydraulic clutch) completely (clutch cable adjustment is about 1/2 way down cable.
Remove derby cover on primary cover. Looks similar to this:

http://www.hdforums.com/forum/attachments/touring-models/118583d1274757072-derby-covers-derby-1.jpg

Loosen locknut on adjuster screw in center of clutch pressure plate:

http://www.chopperassemblyvideos.com/images/Clutch%20Adjustment_JPG.jpg

Screw adjuster in until it JUST touches.
Back off 1/2 to 1 full turn.
Hold screw to prevent it turning while locknut is tightened.

Readjust clutch cable until it has about 1/16" to 1/8" free pay.

Measure by pulling cable away from clutch lever and check the gap:

http://i.ehow.com/images/a02/73/i9/adjust-motorcycle-clutch-cable-800x800.jpg

Dec 31, 2013 | Harley Davidson Motorcycles

1 Answer

Choke stuck on an xt125r


Hi, James for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
Yamaha XT 125R 2005 Service Information
OEM parts for Yamaha
Yamaha xt 125 service manual
throttle cable replacement xt125x
How to replace the choke cable on yamaha xt125r Google Search

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Nov 30, 2012 | 2005 Yamaha XT 125 R

1 Answer

How do I change Yamaha xt125r clutch


Hi, Anonymous for this scenario you will need your service/owners manual if you can't find the first and best tool you ever bought for your Yamaha, despair not, for a mere $9 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Yamaha XT 125x Clutch removal
http://www.cafehusky.com/threads/yamaha-xt-clutch-change-help.44919
YAMAHA XT125R XT125X FULL SERVICE REPAIR MANUAL 2006 2014 Download Manuals... $9
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


May 14, 2012 | Yamaha XT 125 R Motorcycles

1 Answer

How do i adjust clutch properly on 2003 sporty


To adjust your clutch on your Sporty, find the cable adjuster in the middle of the clutch cable. Move the cover out of the way, break the locknut loose, and adjust the adjuster inwards to get as much freeplay in the cable as possible.

Now, remove the cover from the clutch release mechanism on the primary cover. Remove the spring and the locknut. Inside you'll see a slotted adjuster screw. Turn the adjuster counterclockwise as far as it will go. Then back up clockwise 1/2 turn. Reinstall the locknut and the spring, then the cover.

Go back to the cable adjuster in the cable and adjust the adjuster outwards until you get about a 1/8" freeplay in the clutch cable. Work the clutch several times and check the freeplay. If correct. lock the locknut and replace the protective boot.

Good Luck
Steve

Nov 20, 2010 | 2003 Harley Davidson FXST Softail Standard

1 Answer

Can you adjust the timing chain on a yamaha xt125r yhanks


Hi, Andy_kath for this scenario you will need your service/owners manual if you can't find the best tool you ever bought for your Yamaha, despair not, for a mere $10 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Can Anyone Advise Me On Adjusting Cam Chain Tensioner
How to adjust Timing Timing Chain Tension and Valves
YAMAHA XT125R XT 125R BIKE WORKSHOP SERVICE REPAIR MANUAL Download Manuals... $10
OEM parts for Yamaha
http://mybikemanuals.com/yamaha/yamaha-xt-owners-manuals

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 25, 2010 | Yamaha XT 125 R Motorcycles

2 Answers

Need clutch rod adjustment


Slide the rubber boot away from the clutch cable adjuster.
Loosen the cable locknut and turn the adjuster to provide as much cable slack at the clutch lever as possible.
Support the bike so that it's sits straight up.
Remove the clutch inspection cover.
Slide the spring with the attached lockplate off of the adjusting screw flats.
Turn the clutch adjusting screw counterclockwise until the screw stops. Then turn the clutch adjusting screw clockwise 1/4 turn.
Install the lockplate and spring onto the adjuster screw flats. You may have to turn the adjuster slightly to get the lockplate to line up.
Reinstall the clutch inspection cover and O-ring.
Adust the clutch cable at the cable adjuster all the way out and work the clutch a time or two. Now adjust the cable so that you have between 1/16" and 1/8" of freeplay at the clutch lever.
Tighten the cable adjuster locknut and replace rubber boot.
Good Luck

Mar 28, 2010 | 1993 Harley Davidson XLH Sportster 883

3 Answers

The speed shown on the speedometer is not accurate on my Yamaha XT125R - -When travelling at 30MPH -The speedo shows 38MPH -When travelling at 40MPH -The speedo shows 52MPH -When travelling at 50MPH - The...


If the speedo gear is in the front wheel a different wheel would have different gear and mess up the speedo but I'm thinking the gear wouldn't mesh with the old speedo cable teeth.Check a shop manual for stock number of teeth on rear sprocket and tranny sprocket,that will tell the story.While your at it check the stock wheel size compared with what you got.Of course it could be bad speedo.There's springs in there that run needle, so?Maybe borrow one and try it out.Good luck.

Mar 25, 2010 | 2006 Yamaha XT 125 R

Not finding what you are looking for?
2007 Yamaha XT 125 R Logo

Related Topics:

121 people viewed this question

Ask a Question

Usually answered in minutes!

Top Yamaha Experts

Steve Sweetleaf
Steve Sweetleaf

Level 3 Expert

1176 Answers

Paul Ellermets

Level 1 Expert

6 Answers

Neil Lancaster
Neil Lancaster

Level 1 Expert

14 Answers

Are you a Yamaha Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...