SOURCE: Need torque wrench settings for cylinder head bolts
try here http://www.manualz.info/
hope this helps
SOURCE: 91 kx 250 torque values
Engine Top End:
Auto Decompressor Bolt 104 in·lb
Cylinder Head Cover Bolts 87 in·lb
Cylinder Head Bolts: M10 36 S
M6 104 in·lb S
the S in that means the specified pattern ... just like tightening car tire bolts... please note all that it its INCH lbs....
don't know why it says just 36 for the M10 bolts unless they left out inch lbs
Anything else let me know as i've got a manual for the 250 f... actually i've got a few different ones
Robert
Please take a moment to rate this solution as i've taken a few minutes to find the manual thanks
SOURCE: seriously overheating zx6r ninja
With the 05 I would check the thermostat. With the 03 that is normal, my 02 cuts on and off around the same range. I put a switch in so I could turn my fan on when ever I wanted. I run mine once I get to 175...
SOURCE: what is the head bolt torque spec for a kawasaki
28 nm buddy make sure you tighten them down evenly like opposite to opposite
SOURCE: seriously overheating zx6r ninja
my bike did the same thing, and it sounds to me like your riding in a lower gear and your thermostat sensor on the radiator needs to be replaced
796 views
Usually answered in minutes!
×