Floor boards on Wide Glide

Duplicate question already answered

If you mean at the "banjo" fitting where the line connects to the caliper, replace the "Banjo Bolt Sealing Washer" (2 per Banjo Fitting needed).

http://www.jpcycles.com/product/5000250

Hi, Robert parts swapping is common with most motorcycles when it comes to interchangeable or compatible parts from one model with another "EXCEPT" for the CDI's they are year-make-model "SPECIFIC" the best thing to do is call your local Dealership Parts Department or a reputable independent shop. If your location is not near a shop then go online and find a parts catalogue or "FICHE" and match part numbers depending on your criteria.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.hdforums.com/forum/dyna-glide-models/129768-what-tins-fit-2000-fxdwg.html
http://www.mediafire.com/file/l8mk1291i3fiprh/2000_Harley_FXD_Servive_Manual.pdf/file
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
http://mybikemanuals.com/harley-davidson/harley-davidson-dyna-glide-owners-manuals/
https://www.6ya.com/ to speak to me personally

Hi, Diane for this scenario you will need your service manual that has all fastener torque specs -fluid capacities and a wiring diagram on the back pages, parts fiche, and owners manual if you can not find the best tool you ever bought for your Harley, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below and for more specific information or questions at no charge please feel free to contact me at [email protected]. Good luck and have a wonderful day.
https://www.google.com/search?sxsrf=ALeKk01KqWZVym8CcFbwm8xRzCEc5TRQXg:1615203815959&source=univ&tbm=isch&q=2010+Harley+Davidson+FXDWG+Dyna+Wide+Glide+rear+wheel+diagram&sa=X&ved=2ahUKEwiZmMKNz6DvAhXkqFkKHRDOAzQQjJkEegQICxAB&biw=1440&bih=757
http://www.mediafire.com/file/hh3x4sz8742qq26/2010+Harley+Dyna+Service+Manual.pdf
https://partsfinder.onlinemicrofiche.com/ronnies/showmodel.asp?make=hdmc
https://ownersmanuals2.com/harley-davidson/wide-glide-2010-owners-manual-66625
https://www.6ya.com/how-6ya-works to speak to me personally.

You need the complete front end including the wheel. The FXDWG is somewhat of an oddball in that a lot of parts fit only that bike. A lot of other parts will not fit a Wide Glide. This even applies to the exhaust system.

Measure the diameter of your upper fork tubes, they're 39 mm tubes. The Wide Glide uses 41 mm tubes. The Wide Glide also uses a 21" front wheel.

150 section. might get a 180 section with standard rear swing arm or 240 with modified swing arm shock mounts and extended drive sprocket and cover. do a search on wide tyre(tire) kit for harley.

They should fit, just measure the length of the shock from eyelet to eyelet. if you don't have the measurements of the other bike just call a local dealer to find out the standard length

I’m happy to assist further over the phone at https://www.6ya.com/expert/robert_5bac37c3cb991fdb

It sure will!! You answered your own question. guess i get no points for this one.

i called a place ( hogpro.com) about wheels for my 07 fxdwg and talked to the guy there. he said a 180 will fit with no problems and a 200 will fit in the swingarm and fender, you just have to center the wheel and deal with the turn signal brackets etc. Does anyone know where i can get a set of rear struts that are just plain with no recess for the turn signals that will bolt on to the stock bike? I am gonna try the 200/55-18 this winter on a 18x 5.5" wheel.

i called a place ( hogpro.com) about wheels for my 07 fxdwg and talked to the guy there. he said a 180 will fit with no problems and a 200 will fit in the swingarm and fender, you just have to center the wheel and deal with the turn signal brackets etc. Does anyone know where i can get a set of rear struts that are just plain with no recess for the turn signals that will bolt on to the stock bike? I am gonna try the 200/55-18 this winter on a 18x 5.5" wheel.