Question about 2007 Triumph Daytona 675

1 Answer

Daytona 675 won't start

Bike has petrol and battery good. Turn on ignition and all looks good. SIdestand up, bike in neutral, clutch in. Press starter and nothing other than a faint click. Has happened once before at a rest stop after a long ride. On that occasion bike started after about a half hour. This time the bike is cold - I just wheeled it out of the shed.

Posted by on

  • 5 more comments 
  • daytony Nov 22, 2008

    Went out to the bike this morning and it started just fine. Whatever it is it is not a hard fault.

  • punkymane Jan 27, 2009

    Brand New Bike and know it wont start??????Just gives a light click and nothing.....Taking it back for a battery check.

  • cujo78 Feb 25, 2009

    I started it a month and a half ago just fine but today I tried to
    start it by turning on the kill switch, inserting the key and turning
    it to on, I herd the fuel pump getting primed ( I my friend likes to
    say, killing the hamster noise ) and when I hit the engine start, for a
    milisecond the started tried to crank, but stopped and the instrument
    panel 'rebooted'. After the panel comes backup, the oil and engine light stay on ( can't remember if this is normal ) and there is a weird
    humming sound that does not go way immediately. Going to call the
    dealer tomorrow.

  • Anonymous Mar 16, 2009

    Hi my Daytona's fuel pump comes to life when it feels like. Changed it's relays but to no avail, when she does start she misfires could it be the actual pump?

  • daredevilxx Mar 19, 2009

    I have exactly same problem as Posted by cujo78 on Feb 25, 2009.

  • Anonymous Mar 19, 2009

    Same problem. Some times it starts others don't. Don't have a clue about the problem.

  • perillo Mar 19, 2009

    Turn key to on, bike in neutral, clutch in hit the starter and there is a click followed by the gauges resetting.



    Any solution?

×

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 6,966 Answers

Hi,

Two possibilities:

  • starting relay. This could actually be bypassed/jumped to determine if the starter motor will turn:
  • starter motor. most likely carbon brush.
Just a start, do postback how things turned up or should you need additional information. Good luck and Thank you for using FixYa.

Posted on Nov 22, 2008

  • Aretoo Dee II
    Aretoo Dee II Jan 26, 2014

    I don't know about them but ya very well may have solved my problem. Thanks!

×

Ad

1 Suggested Answer

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

08 R6 dash lights on but will not start


All this effort to beat the system --- by pass the safety features --- why don't you fix what you have, return it to functioning status. You have already exceeded the cost of a actual fix.

Feb 25, 2014 | 2008 Yamaha YZF-R6

1 Answer

2008 Yamaha Venture Starting Problems


Hi, Derm one of those switches is faulty for more information about your question and valuable "FREE" downloads that you will need please click on the websites below. Good luck and have a nice day.
http://www.venturers.org/Tech_Library/index.php?action=article&cat_id=001007&id=57
Bike won start in gear
neutral switch issues
http://www.yamahaventure.nl/pdf/servicemanualxvz13tf.pdf
OEM parts for Yamaha
http://www.yamahaventure.nl/pdf/ownersmanualxvz13tf.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

May 06, 2012 | 2008 Yamaha Royal Star Venture

1 Answer

Why does the 30 amp circuit breaker behind the battery box on my 1990 fatboy click once when i push the ignition button? The bike won't start.


Try to reset the circuit breaker. also check for an earth fault on the starter motor .If this is not a circuit breaker and is a relay, you should make sure everything is ready for a start, (ie : in neutral, sidestand up and clutch in and that the battery is charged.) the neutral light being "on" doesn't mean it is in neutral. I hope this helps.

Mar 08, 2012 | Motorcycles

1 Answer

2008 Triumph Street Triple won't start


Hi, Cbitt331 before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
ST3R won start HELP
What to do When Your Motorcycle Won Start
Triumph DAYTONA 675 Service Manual
http://www.triumphestore.com/
Triumph Daytona 675 Owner Handbook Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jun 16, 2017 | 2008 Triumph Street triple

1 Answer

Hi!!!!! i have an kawasaki zx6r 1998 and it dosent want to start , i started it 2 days ago, but today it dosent want i charged battery, and when i push start button it dosent do nothing, i checked coil...


Check the clutch, neutral and side stand safety interlocks.
Double check that the bike is in neutral, and the clutch is pulled in when trying to start the bike.
If the bike is in gear with the side stand down, the bike cuts off all ignition.
If the clutch isn't pulled in, the starter won't engage.
Check all these safety interlock switches, and make sure you are in neutral with the clutch in when trying to start the bike.

Jun 27, 2011 | kawasaki ZX-6R Motorcycles

1 Answer

Triumph Daytona 600 will not turn over


Hi, Jordan_x_tur before testing any electrical component in the Starting System it is "IMPERATIVE" that you have a fully charged battery of 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage, the battery is faulty and must be replaced. AGM type batteries fall into this scenario more so than lead acid batteries.
1. Ignition Switch not in the "ON" position.
2. Engine Run Switch in the "OFF" position.
3. Check the battery terminals for damage or corrosion check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter.
4. Bank angle sensor needs a reset or is faulty.
5. FOB battery low or dead.
6. Faulty ignition switch.
7. Faulty starter button.
8. Faulty kickstand, clutch, neutral safety switch.
9. Security alarm needs a reset.
10. Starter relay, solenoid, starter have failed or circuit wiring faulty.
11. Starter armature or field coils have failed.
12. Main fuse or circuit breaker may be blown or faulty.
13. The electric starter is working but starter clutch has failed.
14. Check for engine trouble codes.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
Bike won start Not battery think
04 Daytona 600 Won start please help
Triumph 2003 Daytona 600 Service Manual
Hermys Tire Cycle Inc 2004 Triumph Genuine Tools and manuals Motorcycle...
Triumph Daytona 600 Owner Handbook Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Jul 04, 2017 | Triumph Daytona 600 Motorcycles

1 Answer

I have replaced the coil, stater, and the brain and i still dont get any spark


You don't mention the year and model...but here are some general ideas.

Most Yamahas have various safety interlocks designed into the wiring system....typically a neutral switch, a sidestand switch and a clutch switch, a tipover switch and a kill switch on the right handlebar.
The design basically is to prevent riding off with the sidestand down....so if the bike is in neutral, the neutral switch grounds to light your neutral lamp and allows for ignition and starter operation.
Is you place the unit in gear...if the sidestand switch senses the stand is still down, it kills the ignition and starter.
If the bike is in gear, starter will not operate, unless the clutch is pulled in and the clutch switch detects this happening.
Tip the bike over and the tipover switch kills the ignition and fuel pump if it has one.

So...is the igniter (black box/brain etc) getting supply voltage...if not check the ignition fuse, and the handlebar kill switch .
Is the neutral light working....if not...try starting with clutch in and sidestand up.

Mar 22, 2011 | Yamaha XT 660 R Motorcycles

2 Answers

I have a 1986 Venture Royal and nothing happens when I press the start button with a new relay and battery with the ignition on


The clutch has to be pulled to start the bike. The clutch safety switch may be broken.
Check the "run/stop" switch as well as the starter button

Mar 05, 2011 | 2000 Yamaha Royal Star Venture

1 Answer

Starter does not turn


chec fuses-bad ones can appear normal-inspec if connecs r tite at starter n solenoid area-n also relays--starter may be bad ur bike is 10yrs-test it--that electric clutch may be malfunctionin too

Aug 30, 2009 | 1999 Yamaha XVS 1100 Dragstar

4 Answers

Triumph Daytona 675


So I just had this exact problem about an hour ago. I wondered about the starter, crankshaft, etc. but discarded them for the simplest explanation: battery.
I'm sure you've all noticed how absurdly easy it is to mistakenly miss the steering lock and put the parking lights on. Odds are you may have done this without realizing (I must've even if I don't remember). Jumper cables are the answer.
If you've never jumped a bike, here's the skinny: 1) Make sure the car you're jumping from is, and remains, off. 2) Connect the cables as normal; black to black, red to red. 3) Let the bike sit for a minute then start her up. 4) If you can, take her for a ride to get the charge back up.
If this doesn't work, then you may very well have more serious issues. Hope this helps, ride safe!

Jan 04, 2009 | 2008 Triumph Daytona 675

Not finding what you are looking for?
2007 Triumph Daytona 675 Logo

3,140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Triumph Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

ROB

Level 3 Expert

858 Answers

Are you a Triumph Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...