The clocks do not show any speed just says 0 everything else seems to be ok
SOURCE: Oil level on the Yamaha XT 660 X
if the filter has been changed m8 ,,u need to add an extra half a litre of oil,, it wont hurt to add extra till u do see it on the indicater,,
SOURCE: how do i reset oil insp. on the scren of yamaha xt 125x
hi had the same prob i turned the ignition on and kept the mode button pushed in and i think that done it hope this helps
SOURCE: hello i hava a yamaha tzr 50 04 plate and the
i had the same problem. On the left side of your wheel (from looking at it from the front) there is a small speed dector and this is most likely where the problem is. 1.try taking the cable in and out of the speed dectector. 2.if this still doesnt work then take the whole wheel off and look at the inside of the speed detector it maybe full of "black gunk" you will want to clean this out and then just dabble a little bit of 10 w 30se oil into it, just to help lube it up a bit (other oil based lube could be used) 3.if neither of these get it working you will probally need a new one
SOURCE: just got the yamaha xt 125 but speedo not working
remove the speedo cable and check the inner part
SOURCE: The speed shown on the speedometer is not accurate
Has it been used offroad with Enduro wheels? Think you can re-set to road using the toogle button by the clutch. check the manual if you have one
1,174 views
Usually answered in minutes!
×