SOURCE: oil change procedure and oil type. steps in
the oil drain is underneath the transmission. There are two drain plugs. The engine oil drain is the plug closest to the left front of the oil pan. Remove the plug and drain the oil, replace the plug. Remove and discard the old oil filter replacing it with a new filter. Pour three quarts of oil into the oil pan at the front of the transmission. Check the oil level and make sure it comes up to the "OIL COLD" mark. Add as necessary to get the oil to this point. Your bike came with H-D brand Syn3 oil. This is a fully synthetic oil that carries an API rating of CG4 for use in diesel engines and the viscosity is 20W50.
119 views
Usually answered in minutes!
×