How do I adjust the Mono Shock on my 2005 TTR 225 Yamaha
SOURCE: Hard starting of a yamaha ttr 225 after sitting
I had a similar problem with my TTR 125. I removed the carb, removed the float bowl and gave a a careful clean. I also removed the choke plunger mechanism and gave that a few shots of penetrating lube oil. The choke mechanism works much smoother as a result.
Just those two simple things and my bike fired up right away.
SOURCE: Yamaha TTR 250, Idling Problem
check the inlet manifold rubber has not seperated from the aluminium part of the manifold ,this is very common on the ttr 250 and will cause the exact problem you have,if it is seperated either replace it or repair it with some good quality rtv sealant avoid sillicone sealant as it is not petrol resistant and will turn to jelly.adam
SOURCE: Lost Keys. Need to replace ignition with toggle switch on TTR 225
take your ignition to a good lock smith and he should be able to cut you another if he is any good
SOURCE: carburetor adjustments yamaha 450yfz 2004
Turn both the air screw and throttle screw inward until they LIGHTLY seat. Now back each one outward one and one half turns. This is the factory setting. I am going to give you a web site where you can download a free PDF factory service manual for a YZ450FR. I believe the model is a bit different but the carbs are the same.
Go to this site and you can download a free PDF service manual. The site may take up to 25 seconds to fully load the list of manuals. It is worth the wait. www.carlsalter.com/motorcycle-manuals.asp The service procedures are there in detail and a lot of diagrams and photos. Don't mess with the pilot screw unless you have to, Part #11 in the diagram.
Can I get a Very Helpful" rating out of this?
253 views
Usually answered in minutes!
×