Riding home last week - noticed the turn and hazards not working - just stopped. Help?
SOURCE: Hazard Flashers, turn signals and brake lights quit working
please check your flasher relay. it is normally a three prong relay box.
tnx 4 using fixya,
drcool
SOURCE: Turn signals not working on 2001 Jeep Grand Cherokee
replace the turns signals flasher unit.
SOURCE: 99' dodge ram 1500 signal light stopped working
If they went out completely it is probably the flasher unit. I just had to replace mine. It's on the fuse block on the left end of the dash. It's the big square unit on the bottom left of the fuse block (looks more like a relay than a fuse). Very simple fix, just unplug and plug in a new one. Part was $11.99 at the auto parts store.
SOURCE: the hazard lights start flashing and I can't turn
there must be alarm fitted that either has the siren disconnected or turned off. Basically sensing an intrusion alert or voltage drop. Flip out the hazard switch, there will be a wire which runs seperate from the body loom into this light, just cut it, the correct one though. if needs be trace it back.....probably end up behind the glove box
539 views
Usually answered in minutes!
×