At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
To replace head gaskets about $ 1500...... its called steel seal i just tried today it worked just like they claimed.... The car i was working on was just pumping out white smoke ... thought i would try ..it worked quit smoking started running smoother... it says permanent repair... will see but looks good $ 80 a bottle.... hope this helps
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Check to make sure both hoses are getting hot. A significant amount of temperature differential could indicate a bad or incorrectly installed thermostat, air in the system or a plugged radiator. I would also put a block tester especially if it overheated badly as it could have blown the head gasket. The block tester will indicate if exhaust gasses have found their way into the cooling system by way of a blown head gasket which may cause vehicle to overheat.
Purchase new egr valve gasket with screen on it. The motor as it get older produces more carbon it then begins to break off and when the valve opens it get caught in there. i have cleaned mine several times and finally found the gasket at napa for around 22 bucks. All you need it 10mm wrech and 10mm socket with ext. takes around 10 min to do.
it can be fix as long as the rod didnt come through the side.or cylinders walls deeply scorned that it cant be honed out .if crank journal damage bad enough after throwing a rod.if all these incidents happen the engine has to be replaced .if engine hydrostatic lock cause antifreeze leak it can be fix.you will have to tear engine back down.besure coat head bolts with non hardening sealant like permatex 2.to keep coolant leaking out of cylinders that what lock up engine.
×