Whot is the setting on the compression test on cylinder haed
SOURCE: Can't find compression specs for 1980 Yamaha 650G
The compression should be around 150psi, but at 120psi it should pop, try to readjust the valve clearance.
Hope this helps!
SOURCE: yamaha yz 426 2002 set timing with crankshaft with
The spark will fire at top dead center and you can see it with a timing light or in the dark with the spark plug removed from the cylinder head but still connected to the coil wire and grounded against the motor (don't hold the plug or you will feel a shock, hold it by the rubber insulator.
SOURCE: Find a parts list book for yamaha 600 diversion
I am assuming you are not familiar with Babbitt's Sports. Their web site has the entire parts list in exploded diagram format and also lists prices. No need to download. The lists are available 24/7/365. Go to www.babbittssports.com/parts/viewbybrand/parts.aspx Please rate my answer.
SOURCE: head bolts tourque settings yamaha dtr 125
cylinder head nuts = 16 lbf ft - 2.2 kgf m
cylinder barrel nuts = 20 lbf ft - 2.8 kgf m
please vote
SOURCE: what are the torque wrench settings for a cylinder
Get in touch with your local yam dealer ,and speak to a mechanic ,they may be able to help ,or get hold of a workshop manual .
404 views
Usually answered in minutes!
×