Diagrams of starter motor on cbx 750 f

cbx 750 , cb 750 a possibility but i would compare before you buy or have yours reconditioned

Make sure you have fuel, compression and spark. If you have all of those check the timing.

you can try to rebuild it your self there very easy

here are a few thing to try first

Starter Motor Does Not Operate or Does Not Turn Engine Over
1. Engine run switch in OFF position.
2. Ignition switch not in IGNITION position.
3. Discharged battery, loose or corroded connections (solenoid chatters).
4. Starter control circuit, relay, or solenoid faulty.
5. Electric starter shaft pinion gear not engaging or overrunning clutch slipping.
6. Bank Angle Sensor tripped and ignition switch not cycled OFF then back to IGNITION position.
7. Security system activated.
8. Motorcycle in gear and clutch not pulled in.
9. Main fuse not in place.
10. Jiffy stand down and transmission in gear.

Disconnect positive battery lead,remove starter motor cover,trace heavy cable back to starter solenoid and disconnect,remove starter motor mounting bolts,remove motor by drawing it to the right and lift clear of its recess,thread cable clear of frame.Take your time and good luck

http://bikeforum.comxa.com/Forum/motorcycle-owners-manuals/honda-cbx750-f-wiring-diagram/

here is one for you, feel free to join our forum if you wish, its free

Hi and welcome to FixYa,

Initial checks would be for the main fusible link inside the starter magnetic switch. Thereafter, check for the presence / absence of +12 on all the fuses box, main connector, battery + terminal and ignition switch.

A wiring diagram of the Honda CBX750F would be of help as reference. Should you be interested, a copy maybe found here.

Good luck and thank you for asking FixYa.

Hi .......... It's only held in place by two set screws, you don't need to strip engine.