Question about 2003 Suzuki RM 125

1 Answer

2003 Suzuki RM 125 fork seal replacement

How to @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Suzuki Master
  • 60,964 Answers

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
03 rm125 leaky fork seal Suzuki RM 125 2001 Fork Seal Replace Repair Suzuki RM125 Owner Service Manual https://www.partsfish.com/page/oem-parts-for-suzuki http://mybikemanuals.com/suzuki

Posted on Nov 12, 2018

Ad

5 Suggested Answers

tombones

  • 3567 Answers

SOURCE: what kind of gear oil for 2003 rm 85

Use 10w40 motor oil in the gear box. Don't use any synthetic oils, oil marked "EC", or oil with "special" additives. Stick with the major brands; Pennzoil, Quaker State, Mobil or Shell.

Use TWO STROKE ENGINE OIL in the pump. If not using an automatic oil pump, then mix the gas and oil 32 to 1. That equals 4 ounces of TWO STROKE ENGINE OIL to one gallon of gas. NEVER use motor oil in the gas. Only two stroke engine oil.

Please top rate this answer. Thanks!

Posted on Jun 07, 2009

Ad

Anonymous

  • 1392 Answers

SOURCE: gsxf 600 fork seals are leaking

Get a manual as you will be in over your head if you haven't done one before, and it will have all the steps in there to do it. There are a bunch of parts in the lower leg of the fork. If you want a better set up then you have, I would look at replacing them with some 89-97 model forks as they are adjustable, and our 88 models are not.

Posted on Jul 25, 2009

Ron Stone

  • 398 Answers

SOURCE: 2003 suzuki rm 85 wont start cleaned carburetor,

if it has reed valves, check them for either cracked or broken pedals. also try starting it with the air filter removed. also make sure the choke is operating properly

Posted on Oct 22, 2009

pugwash814

paul crocombe

  • 377 Answers

SOURCE: What size fork seals do I need for a 2000 ZX6R

http://vitek.vellum.cz/manualy/Kawasaki%20Ninja%20ZX-6R%2000-02%20Service%20manual.pdf

its not quite the easy process it used to be here is the shop manual for you to use,

10w oil
oil level 116mm no spring !

Posted on Nov 04, 2009

mr_den

  • 10 Answers

SOURCE: replacing fork seals and need to know amount of

Outer cartridge on the twin chamber Showa fork for an RM250 uses 350ml of 5W oil.

Posted on Mar 01, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Suzuki GS 125 replace the fork seals


Hi, Anonymous for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
Noob begs for help with fork seal replacement on an EN125 2A
Suzuki GS500 Fork Seal Replacement
Suzuki GN125F Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
http://mybikemanuals.com/suzuki

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Sep 21, 2014 | Suzuki Motorcycles

1 Answer

2013 Suzuki RM-Z 250 fork oil capacity


Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Suzuki, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2013 fork oil quantity
RMZ 250 Fork seal replacement
Suzuki RM Z250 Owner Service Manual
https://www.partsfish.com/page/oem-parts-for-suzuki
Suzuki RM Z250 Owner Manual

Aug 19, 2014 | 2013 Suzuki RM-Z 250

1 Answer

My 98 rm 125's water pump seal is leaking and it needs a top end rebuild are their any good online guides or videos to help me do it?


9003904_rm125__thumb.jpg 5.00 USD
Suzuki Rm125 Service Manual Repair 2004 Rm 125

Instant download of the official manual for the RM125 2 stroke bike. Specifically for the 2004 model, but can also...http://www.tradebit.com/filedetail.php/9003904-suzuki-rm125-service-manual-repair-2004-rm


I hope that this helps you and please do not forget to rate/vote and place a testimonial on my advice.


Wicked Angel


Nov 19, 2010 | 2003 Suzuki RM 125

1 Answer

I need to take the forks off omy 1998 rm 125 how do i do that


on top yoke,remove large nuts,bottom yoke,release pinch bolts and legs should slide out

Jul 03, 2010 | 2003 Suzuki RM 125

2 Answers

My 2003 rm 125 transmission slips out of gear.


im having the same problem with my 2003 rm 125, tombones49 is wright about the shift forks.

May 27, 2010 | 2003 Suzuki RM 125

1 Answer

How do you change water pump seal 98 rm 125 !!???


It should be just that, a leaking seal, gasket. The water pump is external on that bike and doesn't go anywhere but the cooling dept.It doesn't get mixed with oil or anything. Take off the pump itself and replace the gasket. I think that should do it, unless it is the pump itself leaking.
Suzuki RM125 RM 125 Water Pump Housing,,,,
That is an ebay ad. Just in case. Hope this helps.

May 03, 2010 | 2003 Suzuki RM 125

1 Answer

Rm suzuki 125 front forks oil capicety


Do you not have the service or repair manual? Go to Haynes or Google it there will be an answer somewhere just be persistant to look for it... Good luck

Mar 14, 2010 | 2003 Suzuki RM 125

1 Answer

My 2000 suzuki rm 125 does not shift into 4 and 5


The bike has a bent shift fork (or two). The engine needs to come out of the frame then gets torn down in order to replace the forks. Sorry.

Nov 14, 2009 | 2003 Suzuki RM 125

1 Answer

How do you replace the crank seals in a suzuki 2000 rm 125


  1. Remove the left case cover and then remove the flywheel
  2. Drain the oil then remove the right case cover
  3. Remove the clutch
  4. Remove the Drive gear from the crankshaft.
  5. Now use a screwdriver to pry the old seals out.
  6. Smear oil on the interior of the new seals then install new seals flush with the casing
  7. Reassemble and put in fresh oil
  8. A “very helpful” rating for this answer? Thanks
1a28bf0.gif

Jun 26, 2009 | 2003 Suzuki RM 125

Not finding what you are looking for?
2003 Suzuki RM 125 Logo

Related Topics:

62 people viewed this question

Ask a Question

Usually answered in minutes!

Top Suzuki Experts

Marvin
Marvin

Level 3 Expert

85223 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

6151 Answers

ROB

Level 3 Expert

858 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...