2006 sportster 883r
SOURCE: Electrical Problem
It sounds like your ingition switch has failed. This is fairly common if you have a key fop that flaps in the wind. Pretty eash to switch them out. A HD switch is about $60.00 I got an after market that was $20.00.
SOURCE: 2006 sportster xl1200c nothing on speed cluster
had simular problem on my 2007. Speedo would die after bike was washed . Harley screwed with the bike several times replaced speedo nothing. Turns out to be connector on speedo water was getting into it and corroded it . Not enough grease put on connector when built.
SOURCE: my 2006 1200 sportster want start after replacing battery alarm
Do You have a security system on the bike? What light doyou have flashing
SOURCE: Replace coil on Harley Sportster 883R 2006/7
Replacing a coil is one of the simpliest jobs on a Harley. You've only got four connections. Two of them are spark plug wires and it makes no difference which wire goes to which cylinder as the Harley ignition system is a "dual fire" type system. Both spark plugs fire at the same time every time a piston comes to top dead center.
On the other two connects, the small primary connections, these make no difference either as the coil in a non-polarized type coil.
So, nothing to it, just make sure you are using the correct coil for the bike. The primary resistance of the coil should be about 3-4 ohms for your electronic ignition system. Simply unbolt the old coil and bolt in the new one.
Testimonial: "Thanks so much man!"
370 views
Usually answered in minutes!
×