SOURCE: Apache quad 100cc Bike will
this typically comes down to basics. you engine needs air,fuel and spark to run. FUEL - pull the main fuel hose in to the carb from gas tank and turn on to be sure fuel is getting to the carb. SPARK - next pull out spark plug and while still connected to igntion cap, touch end of plug to motor and turn over engine. if you do not see spark, this is your issue and is usually the most common issue. if spark is present, spray starting fluid into the spark plug hole, reinstall plug and try to start, if it trys to start as in starts then dies, your not getting fuel past or from your carb. Clean carb. AIR - last but not least check your air filter and insure it is not clogged or obstructed and is allowing air to the engine. As for no spark, the can be many issues from a bad CDI ignition coil or generator/stator to just a bad kill switch or cut/unplugged wire.
891 views
Usually answered in minutes!
×