Our 2002 Yamaha TTR 125L did a wheelie over a car and landed on the front wheel then fell on it's left side on the sidewalk. It still starts up with no problem, however, the front wheel and forks no longer line up with the handle bars so we think the front forks must be torqued. The wheel seems to line up with the forks but the handle bars are no longer lined up with the fork and wheel. My questions are as follows:
1. How can I be sure that the forks are torqued?
2. Is there a way to make adjustments to the forks or the handle bars to get them lined up again?
3. If I need to get new forks, which model years forks will work for the 2002 model or are the forks specific to this model year?
Thanks so much for your help!
Tami
You should be able to saporrt bike so front wheel is off the ground then take a marker and put lines around where the forks meet the triple trees that hold them in place their should be some allen head bolts that u can loosen on front of the triple clamps once these are loose you should be able to move the forks back to strait again in line with the handle bars just line the lines up that u put on them earlier and tighten the allen bolts back up also when making the lines make them from left to right so marker is touching both fork tube and triple clamp this is only so you get can keep them the same ride hight as before
707 views
Usually answered in minutes!
bought a used ttr 125l. previous owner got the fule lines mixed up. dont know where they go
×