2005 Hyosung GT 650 R Logo
Posted on Feb 18, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

No electrics got chinesse import gy125 to get from a to b had nothing but problems which have been sorted quiet easy. coming home from work the lights began to dim woke up in morning to find had no electrics what so ever lights indicators electric start horn the lot. bike starts with a kick no problem battery held a charge when i charged it as soon as i put back on the bike all started to work again buy the time i got home again the battery had run out agin and all stoped working again. any ideas would be a great help. thanks.

  • Anonymous May 11, 2010

    i have had many of these bikes in the workshop with electrical mechanical ive even had to reweld frames my advice to you is sell and get a ktm or apache as these bikes never quit giving out problems and imm suprised a bike if its 2005 has lasted that long /the fix for your problem is if the battery is new charge 16 hours at 1-2ampers via trickle charge check that the bulbs are correct watts for the bike as they are not uk standard and if you dont know the age of the battery get a new one and charge as above

  • Anonymous Mar 22, 2014

    Hi guys, having an issue with my 09 530 exc, I just dropped the oil out of it, was starting off the battery just fine before, but after the oil change I'm getting nothing out of the electrics, no horn, lights, blinkers or electric start. It will kick start just fine though. Any suggestions what I might have done to cause this? I checked the fuse and it looked fine, swapped it out anyway. Also checked with a friends battery and still nothing.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

  • Expert 66 Answers
  • Posted on Feb 19, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Scholar:

An expert who has written 20 answers of more than 400 characters.

Joined: Feb 15, 2009
Answers
66
Questions
0
Helped
51649
Points
144

Test the charging system w/ a multimeter,to test the alternator and voltage regulator and wiring w/ connectors.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

How to fix 2004 Suzuki 1600?

A few questions so I can help. Is this a Suzuki motorbike or a car? What EXACTLY does it do when you turn the key? How did you 'check for electric'? A vehicle battery should have between 12.6volts to 13.2 volts.
When you turn a starter motor over it needs a large amount of volts to power it, anything under 10 volts and it will struggle. Even a fully charged battery can struggle to turn a starter motor if it is old or faulty.
Try this. First look at the battery and check the terminals are clean and tight. Sometimes it can be as easy as that. Turn the key and look and listen carefully. Try to start the engine. Do you get absolutely nothing and no dash lights? Do you get dash lights which go off when you start the bike but you only get a quiet 'Click'? Do you get dash lights which go off and then a louder 'Clunk'? Does the engine turn over but it's very slow and lazy?
Absolutely nothing suggests a dead or totally flat battery and a lazy, slow starter is a low charge in the battery. A Quiet click could be the Starter Relay and a louder 'Clunk' could be the starter solenoid or the starter itself.
Use the comment button below with more information and i'll try to help more.
0helpful
1answer

Our kenmore elite quiet pack 2 front load washer appears to have no power at all. No lights, no codes, nothing. Worked as expect just 2 days prior. No brakers have been tripped on the electric panel...

Always start with the simplest thing, verify that the outlet is good before troubleshooting the machine. I cannot tell you how often the home electrical is the problem not the machine.
0helpful
2answers

My Kenmore Ultra Wash Quiet Guard

take kick plate off get book out how to reset board
42helpful
3answers

How to unlock Nissan Micra Boot that wont respond to remote

The problem is water getting into the boot switch and shorting out the contacts. A new boot switch is required which you can get from nissan for about £55. I have recently fitted one myself and its a very easy and quick job to do.
0helpful
1answer

My dishwasher just stop, the red light come on and nothing happen

check the filtrs in the machine are clear and the waste pipe is not blockedput it on rinse cycle and see if it empties
0helpful
1answer

Electrical

This is a problem with the Body Control Module (BCM), the dealer can run a test on it to determine if it is the problem for sure.
FixYa.com claims they have factory repair manuals, they have nothing of the sort, this is not to say some experts may have manuals, we do, but we work from home and in most cases have a small library. Experts are not employed by FixYa.com, we help free of charge as much as we can with the general automotive knowledge we have learned while working as auto technicians, specific test values, repair procedures and illustrations are unique to each car line, these are not in most cases available to us. Thanks for using FixYa!
0helpful
1answer

Abs light, engine light

I have the same car, same problem and I've been doing some research. It seems to be that the most common problem is a faulty ABS sensor that causes the car to go into "Limp Home Mode". Limp Home Mode is automatically initialized when the car senses that it has some sort of electrical or mechanical issue. This is most likely what your experiencing, because I, and many other X-type owners are as well. Good Luck.
0helpful
1answer

Maytag quiet series 300 problem model MDBH955AWB Set washer to run on Delay last night. All lights were go. Has worked in the past. It didn't run and now, no lights, and doesn't operate. No problem...

same problem...seems this appliance is a piece of ****....i have read nothing but bad things about it....i have the choice to pay 250 to repair it...or replace it....easy choice....
Jun 19, 2008 • Dishwashers
8helpful
2answers

Quiet guard 3 dishwaher

QuietGuard3: Clean light flashing 7 times? Press Heated Dry, press Normal Wash, then press Heated Dry again and press Normal Wash again (that's 4 button-presses) and that should fix it.
Not finding what you are looking for?

388 views

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...