Starter motor keeps cutting out even when replaced by a new one it has also caused the bulbs to fuse on the bike aprilia rs 125 2002

SOURCE: i need aprilia genuine graphics for 08 rs 125

Some of the photos may be for 2009.
Try;
http://www.apriliausa.com/modelli/road/modello.asp?id=125
and
http://www.aprilia.com/en-US/Model/40/RS+125/Overview.aspx

http://www.motomax.com.tr/overimages/aprilia_RS125.jpg

http://micapeak.com/DPG/aprilia/aprilia_rs125.jpg

http://img.photobucket.com/albums/v703/reddice/rs-125-edited.jpg

Most of the photos are right-hand side. All racetracks are left-hand turn oriented so everyone use that as an advertising base.
Unfortunately the 360 degree rotation icon is not working.

SOURCE: warning light

The warning light and EFI will disappear once you fit power valve :)

I've got 2008 Aprilia RS125 and CDI I derestricted first.. I had warning light on until I fitted power valve.. No warning light now.

SOURCE: de-restrict an aprilia rs 125

Hate to disagree with tina783, but you may have restrictions in place, there is two on the aprilia rs 125. if your on a L plate then the bike should be restricted to 11.5w of power, which is about 15 bhp, when it's de-restricted should be around 34bhp. First is the power valve or a RAVE Valve as some people call it, have you got one? located on the front of the cylinder body, above the exhaust. some times the body of the power valve is there, but there is a blanking plate is underneath it. If the body of the power valve is missing, then its a blanking plate. need to get a power valve and the control unit and the solenoid, fitting is easy look around the net and you'll find one. The next one is the emissions restriction, which is in place due to italy have a real hard on about thier air. The CDI at the back of the back of the bike needs to removed and then if you look at one side you will see a rubber sealant has been used to fill in one side. You need to dig that out and snap a little piece of the circuit board and then refill the hole with a rubber sealant. try to search the net for a how to do on this you need to look at the pics and see what part of the board needs snapping, don't go blindly into this other wise you will kill the CDI. the bike then will act alot more smoothly in the lower end revs.

SOURCE: does a aprilia rs 125 have a thermostat

yes buddy as the rs125 dont have fans on the radiators so the faster you go the more are passes through the radiator to cool it down dont worry abour it buddy there built for this or if your not happ install a fan your self also just make sure you have coolant in there

SOURCE: i have a 2002 aprilia rs 125 gp1 how can i tell

The VIN would tell you this if you know how to read it. If you don't merely call a dealer and give them the number and they will tell you since they would want your parts business. An alternative method would be to merely test the acceleration of your bike. Look online for the times of both models. I haven't heard of a 14bhp aprilia but suppose it's possible. Here are some specs I dug up."RS 125 Standard" Topspeed=170kph/105 mph. Acceleration=0-100kph/0-60mph 6.6 seconds (at sea level). Racing track Aprilia RS 125 topspeed=220kph/140mph Acceleration 0-100kph/0-60mph 5+/-seconds.

Testimonial: "really helpful info thanks"