Question about 2010 Husaberg FE 390

1 Answer

SERVICE MANUAL 2010 Husaberg FE 390

2010 HUSABERG FE 390 SERVICE MANUAL @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husaberg Master
  • 59,351 Answers

Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.manualslib.com/manual/1235895/Husaberg-Fe-450-Eu.html
http://www.motoxotica.com/uploads/8/1/1/8/81184596/2010_fe_390_chassis.pdf
http://husaberg.org/service-manuals/17516-2010-husaberg-fx-fe-390-450-570-owners-manual.html
https://www.motorcyclistonline.com/2010-husaberg-fe390-review
https://en.wikipedia.org/wiki/Husaberg

Posted on Jun 13, 2019

Ad

3 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
goofduck

Jeff Adkisson

  • 490 Answers

SOURCE: i need 2001 husaberg fe 400 plastics

dennis kirk

Posted on Apr 21, 2009

miket756

Michael Thorpe

  • 2702 Answers

SOURCE: Hi. My Husaberg fe 400e need 100 houers

all it needs is fresh engine oil and run a spaner around it,,,just incase any thing is about to "drop off"

Posted on Feb 05, 2010

Testimonial: "LOL! I`ll do just that:) Thanks for the help.., You saved me some BIG money!!!!Q!"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

FE 390. Bike will not go into neutral with engine running. How to fix?


Hi, Anonymous for this situation I would call my local dealer or reputable shop's service/parts department and inquire about any possible quick fix/test or parts inquiry. If necessary transport your vehicle to the dealer or shop and have a professional technician take it for a test drive, if it is in running condition, and give you a written estimate of repairs and answer any specific questions you may have about your issue. For more information about your issue please visit the website below. Good luck and have a nice day. DOWNLOAD 2010 Husaberg Fe 390

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Oct 24, 2015 | 2010 Husaberg FE 390

1 Answer

2013 Husaberg 350 Enduro how to adjust the timing


Hi, Barry it's nonadjustable for this scenario you will need your service manual, parts fiche, and owners manual if you can't find the best tool you ever bought for your Husaberg, despair not, for a mere zero $0 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.topspeed.com/motorcycles/motorcycle-reviews/husaberg/2013-husaberg-fe-350-ar148843.html
KTM 350 Valve Adjustment And Camshaft Swap
http://www.datamanagement-le-blog.com/fe350_service_manual_download.pdf
https://www.rockymountainatvmc.com/Parts-Finder/11057/2013-HUSABERG-FE-350
https://paitandacent.files.wordpress.com/2015/08/husaberg-fe-350-owners-manual.pdf

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Feb 07, 2015 | Husaberg Fe 400 E Motorcycles

1 Answer

2003 Husaberg Fe 650 e no spark


Hi, Lance and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery should have 12.5 volts or more and be able to pass a proper "LOAD" test if necessary, you may have a preliminary reading of 12.5 volts or more but little or zero amperage the battery is faulty and must be replaced, AGM batteries fail in this scenario more so than lead-acid batteries.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and module.
5. Spark plug cables in bad condition, shorting/leaking, spark plug cable connections loose check for spark leakage in the dark.
6. Faulty ignition coil or electronic control module.
7. Faulty pulse coil.
8. Faulty CKP, CMP, or BAS sensor.
9. Faulty ignition switch.
10. Faulty run/off switch
11. Tilt sensor needs a reset.
12. Security alarm failing to disarm needs reset
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
2003 FS 650 No spark Husaberg Forum
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://www.husaberg.no/Teknisk%20data%20Husaberg/Delekataloger/Firetakt/2000-2008/2003parts.pdf
Husaberg 400 User Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 06, 2018 | 2003 Husaberg Fe 650 e

1 Answer

I was fitting a after market tail light the other nite and had the engine running as to have power to identife wich wire did what (testing with a multi meter) and the engine stoped as if it was switched...


Hi, Jonti16 and the usual suspects are:
1. Fouled spark plugs.
2. Severely discharged or a damaged battery, should have 12.5 volts or better and be able to pass a load test if necessary.
3. Check battery terminals for damage or corrosion, check the battery cables at "BOTH" ends for loose, corroded, or broken connectors, "INSIDE" and outside the cable harness, perform connector wiggle test and check cables with an ohmmeter if necessary.
4. Loose connection at ignition coil or plug between ignition sensor and CDI box.
5. Spark plug cables shorting or leaking, spark plug cable connections loose, check for spark leakage in the dark.
6. Faulty ignition coil, pick up coil, trigger coil or CDI box testing needs to be checked with an ohmmeter at 70 degrees Fahrenheit
7. Faulty safety switches clutch, kickstand, neutral, off/on etc.
8. Faulty ignition switch.
For more information about your issue and valuable "FREE" downloads that you will need please click on the blue links below. Good luck and have a wonderful day.
No spark AGAIN
husaberg what they don want you to know
HUSABERG FE 450 Repair Manual
http://dirtypart.com/manuals/filer/Husaberg/Husaberg%20Repmanual%20-05.pdf
http://dirtypart.com/manuals/filer/Husaberg/Husaberg%202001-2002%20SPARE%20PARTS%20MANUAL.pdf
Husaberg 400 User Manual
HUSABERG FE 450 EU Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Mar 16, 2017 | 2002 Husaberg Fe 501 E

1 Answer

Needing to find out how to set timming and get a workshop manual


Go to www.husaberg.com
Select "service", then "downloads", and look for your year, and the type of information you need.

Oct 12, 2010 | 2000 Husaberg Fe 501 e SM

1 Answer

Husaberg 600 wont start on the kick


How much do you weigh? If you have strong compression, that's what you want.

Aug 06, 2009 | 2000 Husaberg Fe 600 E SM

Not finding what you are looking for?
2010 Husaberg FE 390 Logo

Related Topics:

423 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husaberg Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

Marvin
Marvin

Level 3 Expert

85206 Answers

Strech
Strech

Level 3 Expert

1562 Answers

Are you a Husaberg Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...