At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Clutch it set over the winter, ran fine clutch worked great. 6 months later i went to start it, started right up but the clutch lever is very loose no pressure, do i need to bleed it . full of fluid everything dont understand why its not functionly properly
Check to make sure the slave and master cylinders are working. You can probably bleed it if the slave cylinder started leaking. Could possibly be internal on the clutch master.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Suspect you have a loose clamp on a radiator hose or the oil change guy made something leak. There is a tool which is similar to a a bicycle pump in that it pressurizes the water system and your engine does not have to run or be hot to test. Some major auto parts stores may have a loaner.
Its going to stay hot and lose pressure until you fix the leak.
your injector or fuel pump may be going out, next time when you check the issue, check your distubutor again and making sure you getting sparks, if you do have sparks than it has to be your fuel problems.
×