Stator wires broke off at the end and were re connected by soldering together but still no spark want to do continuity test but not sure of correct resistance
Glen, Check the attached links,
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
YAMAHA MANUAL STORE
Motorcycle Owners Manuals MyBikeManuals com
Clymer Manuals Electrical Troubleshooting Video Motorcycle ATV Quad Wiring...
Steps to Take When Your Motorcycle Won Start Dennis Kirk Powersports Blog
SOURCE: DT 125 X Backfiring??
This may not apply to your bike but a lot of the smaller engine 2strokes can still run but backfire if they have one broken reed valve.
SOURCE: yz125 no spark
G'day i am a . YZ 125 j ...lets see now! You could perform these tests yourself.Check your plug CAP,if in doubt replace it with a new one. Take the below ohm figures and see if they match up. Pulse coil: white/blue and white/red= 310 ohms. low speed coil: Green/white and Black/red= 900 ohms. high speed coil: Green/blue and black= 55 ohms. hope this has helped in some way to helping you solve your problem.If it has please leave feed back.Ride hard , see ya,Tabbycat
SOURCE: i have a 1999 yamaha dt 125 r and the light bulb
Hi fit butcher,
The assembly of DT's speedo are all the same after 1998 models. below is a picture of a 2002 DT125/175. the assembly is the same, only that yours does not have a tachometer, yet the placement of the assembly is the same.
and here is the manual for your unit,
hope this helps,
regards,
voodoo
SOURCE: need wiring diagram for a yamaha dt 125 water
try here
http://sites.google.com/site/motorcyclemanualstore/
email as i did and i got what i wanted. site still under construction though
SOURCE: yamaha dt re 125 owners workshop manual
Try one of these:
http://www.yamaha-motor-europe.com/community/service/manuals.jsp
http://www.yamahaownershandbook.com.au/?r=0
Online and free.
582 views
Usually answered in minutes!
×