Wheel assembly diagram - 2009 Harley Davidson FLHTC Electra Glide Classic

The clock spring assembly was most likely damaged during removal/assembly of the repairs. This assembly controls the airbag/horn/steering wheel functions. It is not that hard to change if you have a steering wheel puller to get the steering wheel off. Here is an exploded diagram. Hope it helps. The very top of the diagram is the clock spring assembly and it will be the first thing you see when the steering wheel is removed

The other computer go to YouTube diagram for 2010 Harley-Davidson Dyna glide rear wheel assembly disassembled

email me at [email protected] and I can send you a few screen shots from alldata.
I have that program on a different computer.

put "fixya/alldata" in the subject and make sure to add in the info you want me to send ya. (year, make, model, engine size, etc)

For front wheel assembly diagram and replacement,click the link below and go through procedure:----Front wheel hub assembly Diagram and replacing procedure? http://howtobyme.blogspot.in/2012/02/front-wheel-hub-assembly-diagram-and.html
----------Front wheel assembly diagram to replace wheel bearing? http://howtobyme.blogspot.in/2012/02/front-wheel-assembly-diagram-to-replace.html
-------------How to replace Front wheel bearing? http://howtobyme.blogspot.in/2012/02/how-to-replace-front-wheel-bearing.html
-----------Check all 3 links one by one.This will help.Thanks.

1. 
   

1. Item

Part Number Description 1 W706540-S900 Axle-to-wheel hub nut (4x4 only)
Removal Note 2 - Wheel speed sensor harness connector
Removal Note 3 2027 Anchor plate bolt (2 required) 4 - Brake caliper, pads and anchor plate
Removal Note 5 1125 Brake disc 6 1107 Wheel hub-to-wheel knuckle bolts 7 1104 Wheel bearing and hub assembly
Removal Note 8 N642567-S36 Tie-rod end-to-wheel knuckle nut 9 W707254-S427 Lower ball joint-to-wheel knuckle nut 10 W520215-S427 Upper ball joint-to-wheel knuckle nut 11 3K185 Wheel knuckle
Installation Note 12 W710279 Integrated wheel and bolt (3 required)

Go to www.huffy.com they may a diagram for bike if not you can customer service @ 800 872-2453

1. mabye if your nice the dealer will print one out for you.

A diagram of what?
If your wheel is bent you have to replace the rim. I don't think there is anybody who straightens wheels anymore. If it's a factory wheel, you can pick one up at a salvage yard for a fraction of the price of a new one..

The question you asked me to clarify was really quite simple..... I needed a diagram of rear wheel bearing assembly for a 2000 Dodge Grand Caravan 3.38 litre, 6 cylinder, 2 wheel drive vehicle. You couldn't provide me with a diagram so I took the wheel off looked at the old one then the new one and just did it myself. Thanks for not helping.
Stormin Norman