05 R6- i put an integrated tail on it and it didn't come with any prewired connectors and i found that my stock connectors had been cut off the wiring harness so i just had a bunch of loose wires
well after following wiring diagrams its hooked up, all but two wires from the turn signals that i think show go to a ground in the diagram. . .
anyway if the fuse for my headlight is taken out everything works fine, just obviously no running lights so no night riding
if i put the fuse back in i have normal blinkers but no brake lights and the tail light has the normal right red running light but the left side has very dim amber
i think it is possibly my flasher- there is no "click" when my signals are on, but has anyone run into this issue?
Firstly ground them two wires and see what happens
you have got something screwed up if you gotta take fuses out to get stuff to work.
i find it easy if i draw what i have on paper first. you should have 3 wires for tail and 2 each for turns. those maybe 3 blacks, 1 green, 1 brown, 1 blue, 1 yellow.
http://www.carlsalter.com/motorcycle-manuals.asp
you can get a free download service manual here it will have the correct wiring diagrams for your bike. it shoudl help
583 views
Usually answered in minutes!
yeah i put a load equalizer on it and it made the right side flash slower but not the left blinker, so looked at all wiring on whole bike and found the wires for the left side were crossed in the front by the fuse box and so rewired and works fine, i never thought about it being something in the front
where can i find a diagram or picture of wiring for a yamaha 2000 yzf r6 to see if i have the right hook up for tail lights
×