2005 Hyosung GT 650 S Logo

Related Topics:

Posted on Mar 29, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Help!!!!!!!!!!!!!!!!!!!!!!!!!!! how does one bypass the side stand relay for a hyosung gt 650s.

  • LittleBear79 Mar 29, 2009

    Thank you. Thank you. Thank you. Thank you. Thank you.

    It's 3am and with out your help I would have been faced with a 6 hour hike pushing the bike with me. Thank you so much for your help.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

  • Expert 298 Answers
  • Posted on Mar 29, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Vice President:

An expert whose answer got voted for 100 times.

Joined: Oct 02, 2008
Answers
298
Questions
2
Helped
122985
Points
871

Hi there!
you'll need to remove the pull/push switch connected to the side stand. Trace the wire that goes to the side stand.. You may disconnect this wire so you can kick the side stand with the engine still running. Note that this is a safety measure for motorcycles. i wouldnt recommend removing it unless its malfuncitoning.

Hope this helps.
-levibit-

  • Anonymous Mar 29, 2009

    Hi there!

    No problemo amigo. Clean the contacts and set the adjustments right. this would ensure the bikes full operation in the future so you would not be bothered again.

    Thanks for the rating and
    thank you for using fixya!
    -levibit


×

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Any ideas or repairs someone has done to fix this issue?

do a compression check. sounds like one of the headgaskets are leaking.
0helpful
1answer

Disconnect side stand switch 2011 Hyosung GT250R

Do you want to bypass the switch? The switch either "makes" the circuit to indicate the stand is down - OR - the switch "breaks" the circuit to indicate the stand is down. Either way, if it has two wires, unplug them and see if it bypasses (disconnects). If it doesn't work just plug the wires into each other and that will bypass the switch.
0helpful
1answer

Hyosung sense kick problems

Hyosung used a very bad quality side stand switch on some models. I just removed the switch located at the stand's pivot and short the leads to bypass the switch. Note that you are not protected by this safety feature any more and must be very careful not to ride with the stand down. It is not a big deal and you get used to checking that as you become a better rider.
0helpful
1answer

I have a problem with my hazard relay it is the second one that went on my hyosung gt250r in one week. I replaced it with an origenal part from hyosungsource but the relay starts clicking as soon as I...

You have a crossed wire someplace in your wireharness. go back to the dealer and make them change it - it should be under warranty if you bought it new.
1helpful
1answer

2008 Hyosung GT650S I think my side stand relay is causing my bike not to start. The Stator was replaced recently and the battery seems to be holding a charge fine. Sometimes the bike just won't...

What I would suggest then is to bridge the side stand switch. If the switch stays open circuit, it will never start but if you bridge the wires before the switch then the bike should start and have now solved the problem for the interim or you if it does not start you know you have to look elsewhere.

Please get back if you require anything else or give favorable feedback.

Thank you
0helpful
1answer

Bike starts but as soon as u engage gear shift it stalls bike

Does this model have a switch on the side stand. If so it could be faulty and fooling the bike into thinking the side stand is down and stalling it for safety.
0helpful
1answer

My hyosung cuts out when put into gear even with stand up.

disconnect the stand switch and try it maybe the stand switch is faulty get back to me with results
0helpful
1answer

2007 Hyosung GT250R stalling in 1st

clutch needs ajust cable wise or internal-they r similar to ***-chec library sec 629 if no manual is sold
0helpful
1answer

Ignition failure Hyosung gt 650s (Au)

You should have paid a little more money and got a Kaw; suki; hon. yam. you should have gotten somthing bran name; you got a throw away bike. The wirring system is messed up and there might not be no replacment parts .Your wirring system needs to be reworked.
Not finding what you are looking for?

596 views

Ask a Question

Usually answered in minutes!

Top Hyosung Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

john h

Level 3 Expert

29494 Answers

Are you a Hyosung Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...