Wont start it clicks 1 time when i press start button also i just got it and dont know anything about it

this is the download page for the motherboard manual http://www.biostar.com.tw/app/en/mb/introduction.php?S_ID=363&tab=1 it is in Zip file form you want the front panel pinout if you are having a tough time reading this it is because i didn't use any periods or capitalization bu i guess you are used to it

Reseat the lamp again, and make sure that the lamp door is completly closed and screwed shut. There are safety switches that keep the set from turning on if all is not secure. If this does not help, you either bought a defective lamp, or your ballast is the problem.

goto (http://www.smeg.com/) click on services

This watch is a chronograph. The true second hand is the one you mentioned that is currently running (what is called the subdial hand).

To use the chronograph hand,

1) Press the button at the 2:00 location to start timing.
2) Press the button at the 2:00 location to stop timing.
3) Press the button at the 4:00 position to reset the chronograph hand(s) to zero.

To reset the chronograph hands to zero, set the crown to either click position one (usually date setting) or two (usually time setting), and use each button to test which subdial hand it will zero out.

Usually it is the first crown click position, and pressing the 2:00 or 4:00 button to zero out.

Warning: Leaving the chronograph function running will drain your watch battery much faster than using the standard second hand, as it is a complication meant for the purpose of timing an activity or other event.

If this does not zero your watch, you must either send it back to Michele, or visit your nearest Certified Master Horologist to assess the issue, as the movement may have a defect.

click on the top right button to view time, then click bottom right button and hold it as the time is still appears. then it will start blinking. if you press the bottom right button you will be able to swap the command you want to change (H,Min,Y,D,M) and if you press the top right button you can increase (only) the number you like. Left buttons i dont know what they do :P

In order press # * C * then enter the number 14 then 1 and press start.
Please let me know if this fixes your problem it should, no one answers.
99 percent of the time this will clear that code.

on the control panel press clear button then interrupt button then zero button then interrupt button the display will change, then press 1 then 4 then start button then clear button (or power off) if you are blinking H then 5 it means you have had several jams in the fuser

Try this:
1) turn on the TV
2) from the remote control press MENU 2,4,7,0 then ENTER
3) tv will state on screen that it is INITIALIZING
4) when done press the front reset button.
5) should be good to go!

I have had this happen nore than once. If you press the 1 button and hold it down. At same time press and hold the enter button for 2 or more seconds. Your remote will now be set to the system. Some models have a device code of 2 or 3. If your not sure what your device code is start with #1 device code.

hi,

it would be great if you can tell me the operating system that you are using on you computer.

anyways check this out:

for windows xp:
*****************
>click on start-->run
>type in services.msc
>press ok
>from the new window called services local, double click on print spooler
>press the stop button
>now press the start button
>press ok and come out of that window.
>close all the windows and restart you computer.

for win vista:
***************

> click on start, inside start search type in services.msc and hit enter.
> then follow the same as above