1996 kawasaki VN 1500 Vulcan Classic Logo
Paulo R Beraldo Posted on Apr 07, 2009

Front forks oil capacity kawasaki en 1500 1996

I`d must change the seals oil and I don`t know how much oil I use in the forks...Thanks.Paulo, from Brasil

1 Answer

Anonymous

Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

  • Contributor 1 Answer
  • Posted on May 11, 2009
Anonymous
Contributor
Level 1:

An expert who has achieved level 1.

Mayor:

An expert whose answer got voted for 2 times.

Joined: Apr 21, 2009
Answers
1
Questions
1
Helped
1225
Points
4

My book says "Capacity 368.5-373.5 cc dry. This is for a 1996 Vulcan 1500 A10. Should be the same.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

What is the fork oil capacity on my Kawasaki GT750

Front Fork Oil cc 300cc 2.5cc


Front Fork Oil cc 300cc 2.5cc


Fork oil grade SAE 5/20W

hope this helps you

0helpful
1answer

I need the oil capacity for the front forks

That is something you are going to have to look up from the manuf. They don't hold much, maybe 1 pt. I just did mine, 3/4 pint in each. I bought 2 bottles at the motorcycle shop and still have some left. So look up your forks, ohlins, brembo, sachs, ceriani, showa, whatever, get the schematic for them, pull them apart in a big pan to catch the oil, and replace the seal, or whatever you are doing. You don't have to top them off if they don't show signs of a leak, if you feel the shock is gone out of them, well, that's different. Your bike is a 2005, it shouldn't have a problem in the front end. Hope this helps.
1helpful
1answer

Fork capacity on 1991 KX 250

SILKOLENE PRO RSF 5WT or use
SILKOLENE FORK OIL LIGHT
500-MLS OIL EACH LEG
3helpful
1answer

Fork oil capacity for a 2005 kawasaki vn1600 mean streak, Thanks Des from Ireland

Hi Des, Im am Irish too, howya doin? The oil you want is SAE 10W-20. and 445ml if you are changing the oil. It can be more accurately checked with the fork removed and fully compressed and the spring removed, the oil will be 120mm from the top ot the stanchion.
The manual will give you more info on this and any other future problems so here is a link to it. Good luck to ya, and please rate me if I've helped you. Thanks
[email protected]

VN1600 manual...
http://www.scribd.com/doc/9607829/Kawasaki-VN1600-A1A2-Vulcan-03-Service-Manual-ENG-by-MosuenoPW
1helpful
2answers

I need to know the fork oil capacity for a Kawasaki GPZ750

the oil is SAE10W20 and you must put 325 ccm if you change the oil, and if you let it all drain over night 380 ccm (plus or minus 4ccm). After that, mesure the level in each cilinder of the fork. In the left one, you must have 120mm (plus or minus 2mm) of air left in the cilinder, and in the right one, 149 mm (plus or minus 2mm) .
Hope this helps. Try getting a repair manual. You will find all the answers there.
Best regards, Gabyshor.
1helpful
1answer

Fork and engine oil for kawasaki kle 400 from 1993

Get the fork oil from the Kawasaki dealer and he will give you the right oil and tell you how much is needed. The gearbox oil is 10w40, any major brand is fine. I think your bike has a oil dipstick? If not then the oil capacity should be on the casing by the oil fill. Worst case, ask the dealer while you are there!
Best wishes and I hope this helps.

Please rate this solution. Thanks Robert!
1helpful
1answer

Fork seals and oil capacity

fork oil capacity is 578 to 586cc
Not finding what you are looking for?

1,235 views

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...