At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Bike bogs when throttling quick then revs up. if you turn the choke half on bike has quick throttle response and runs better. when choke is off and you snap throttle to quick bike will actually quit.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,,remove and clean the carb. before doing this you might want to check the air screw on the side of the carb, with the bike running turn the screw half a turn in and give the bike a rev,if it bogs more,turn the screw half a turn out and see if throttle response improves.
Depending on the type of intake system, if it's a normally carburettored bike, there is an air mixture screw on your carby(s). Set this screw at one and one half turns out from being screwed to stop. Run bike till it is warm and set IDLE screw or throttle stop at optimum idle revs. Without using choke or throttle, turn the air mixture screw slowly in or out till revs build to highest level. Reset idle screw or throttle stop to set revs back down to optimum level as before. If this does not cure your problem, depending on if it's a 2 or four stroke, single or multi cylinder engine your problem may be one of many from fuel ratio, valve rocker clearance, ignition, plug range etc....specify make/model for proper info.
Cheers
hi buddy set the needle clip to its normal condition and also on the carb is the mixture screw you need to turn this all the way in and out 1 turns and try this you will always get a bog if you rev fully too quick i had this problem with my kx85 and it was just this hope this helped mate i will send the pic in a mo
×