At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
2004 honda crf230f bogs when quick twisstin throttle then revs up but when putting choke on half way bike has excellent throttle response and runs better.
that does not work i tried that that does not work i tried that
AnonymousMar 25, 2014
My TE 250 revs to high. How do I get it down? Also my bike back fires wen letting go of the throttle. could it be that my valves are out of balance?My TE 250 revs to high. How do I get it down? Also my bike back fires wen letting go of the throttle. could it be that my valves are out of balance?
You can't post conmments that contain an email address.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Hi,,remove and clean the carb. before doing this you might want to check the air screw on the side of the carb, with the bike running turn the screw half a turn in and give the bike a rev,if it bogs more,turn the screw half a turn out and see if throttle response improves.
This is a common problem depending on the area you live in.
Try this; quickly snap the throttle 3 -5 times and kick start it immediately. Do not open the throttle while trying to kick start your bike. You can open it about 1/4 of the way just before you kick start it, but let go of the throttle just as you kick start it - kick back sux and can hurt you.
You may have to run the bike a little richer (Carb adjustment).
Hope this helps. Please vote if this information was useful to you. Thanks!
hi buddy set the needle clip to its normal condition and also on the carb is the mixture screw you need to turn this all the way in and out 1 turns and try this you will always get a bog if you rev fully too quick i had this problem with my kx85 and it was just this hope this helped mate i will send the pic in a mo
My 'wing won't run unless it has been warmed up some. I would suggest that you r&r your carbs to make sure the jets in the bottom are working correctly. They tend to get plugged up, especially after sitting & the aluminum flaking off inside... Rick
that does not work i tried that
My TE 250 revs to high. How do I get it down? Also my bike back fires wen letting go of the throttle. could it be that my valves are out of balance?
×