1972 Honda CB 250 Logo

Related Topics:

A
Anonymous Posted on Sep 02, 2013

1972 Honda CB 250 valve clearance - 1972 Honda CB 250

4 Related Answers

jhovel

  • 12 Answers
  • Posted on Sep 10, 2009

SOURCE: manual for engene

You will need to download the Service Manual. You can find it at:
http://pdftown.com/PDF-Honda-CB750-Shop-Manual.html
It's in 6 parts. They are all there and your information is in them.
Good luck with your rebuild!

Ad

Anonymous

  • 478 Answers
  • Posted on Feb 10, 2010

SOURCE: how do you get the seat up on a 1972 Honda Cb 100

on the left and right sides by the shocks there are single screws, and at the front of the seat between the gastank and the seat there is 1 bolt which will remove the seat

sisadsl

gavin jones

  • 1508 Answers
  • Posted on Apr 05, 2010

SOURCE: Need a 1972 Honda XL 250 that needs a kick starter Shaft

you will have to find the same model, there were no xr back then

kimberly_52148

kim barham

  • 2 Answers
  • Posted on Jan 25, 2015

SOURCE: 1991 CB 250 Nighthawk: whats the top speed for a 1991 honda nighthawk 250...

The specs for a 1992 cb 250 nighthawk give a top speed of 140kph at 7500 rpm. I have just ridden mine and it comfortably sat on a touch over 120 kph

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

VALVE CLEARANCE CB250 1972

I'm assuming that in saying tight tappets it's just a matter of checking the valve clearance on each cylinder in turn with the pistons at TDC.

as you would when doing a service 004" inlet 005" exhaust.
0helpful
1answer

I have a 81 honda els 250 I'm putting the motor on

I am very sorry but we have no diagrams for anything this old.
0helpful
1answer

Need piston clearance value on a rebore for a 1964 Honda c105 and can push rods be straightened? Frame# c105-0040778 what year?

Piston clearance is .002. The push rods can be straightened, be careful not to crush them. It's also not critical that they are perfectly straight. Not sure about the year, Honda actually didn't create "model years" until 1972. They used a letter and # designation (for example, 68-71 CB 750's are K1) until the changed something about the bike.Good luck!
4helpful
1answer

Where do I find a free repair manual for a 250 honda custom motorcycle? It is a 1980's bike.

The site below has what you need. It is a free download. Could you take a moment and rate my answer? Thanks.
http://www.carlsalter.com/motorcycle-manuals.asp

2f67b32.gif
2helpful
1answer

How do I remove a one peice seat from a 1983 honda cb 250 custom?

this bike seat bolts on one bolt on each side of seat, towards the rear of the seat, then lift tail end of seat and pull backward.
0helpful
1answer

What makes a honda 250 big red 3 wheeler blow white smoke all the time

sounds like your carb is running to rich. might need rebuilt. also try some dry gas. you might have water in the gas
0helpful
1answer

How do i set the valve clearances and points on my 1971 honda cb250?

I would consult and owners manual for procedure and correct gap setting..after finding the correct gaps, you would need to pull the valve cover , position the timing mark as described in owners manual then losen and adjust valves.
0helpful
1answer

Manual for engene

You will need to download the Service Manual. You can find it at:
http://pdftown.com/PDF-Honda-CB750-Shop-Manual.html
It's in 6 parts. They are all there and your information is in them.
Good luck with your rebuild!
0helpful
1answer

Tip of the bike

Sounds like you have a honda dirtbike. I would need to see a picture to confirm.
Not finding what you are looking for?

207 views

Ask a Question

Usually answered in minutes!

Top Honda Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Mike Cairns
Mike Cairns

Level 3 Expert

3054 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...