Motorcycles Logo

Related Topics:

chad b lehman
chad b lehman Posted on Sep 13, 2013
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

97 750 suzuki katana clutch engages but bike stalls out when shifting to first

Answer This Question

1 Answer

Michael Green

Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

  • Master 3,799 Answers
  • Posted on Sep 13, 2013
Michael Green
Master
Level 3:

An expert who has achieved level 3 by getting 1000 points
Superstar:

An expert that got 20 achievements.
All-Star:

An expert that got 10 achievements.
MVP:

An expert that got 5 achievements.

Joined: Mar 18, 2011
Answers
3799
Questions
0
Helped
600270
Points
10177

In which case the clutch is not properly dis-engaging. Adjust the clutch cable properly, if this still doesn't fix it you will need to replace the clutch friction plates at the very least.

5 Related Answers

Anonymous

  • 190 Answers
  • Posted on Mar 19, 2009

SOURCE: Engine stalls when engage in any gear from neutral.

CHECK THE SIDE STAND SAFETY SWITCH IS OPERATING

Ad

Anonymous

  • 104 Answers
  • Posted on Mar 20, 2009

SOURCE: clutch snatching Madass 125cc

Could be burnt, or scorched clutch discs. DId you check the oil lately? I believe the Madasses have a wet clutch, right? Hope you didn't burn up the whole clutch basket. But you may have. Check the oil now!!!

Anonymous

  • 89 Answers
  • Posted on Apr 23, 2009

SOURCE: cr250 clutch not engaging

sounds to me like your friction plates in your clutch assy. are worn down to much.

Anonymous

  • 948 Answers
  • Posted on Apr 25, 2009

SOURCE: clutch engaged engine stalls 2003 Suzuki GSX-R 1000

The bike has a sidestand interlock that prevents you from riding away with the kickstand down. That interlock is not functioning properly. Could have been bent or moved, unplugged, or perhaps the relay has failed. If physically activating the switch does not work, and connecting the wires with a jumper does not work start looking at the turn signal relay, some bikes have that circuit integrated into the relay.

Anonymous

  • 48 Answers
  • Posted on Apr 30, 2009

SOURCE: suzuki rmz450 is stalling when clutch is let out.

Carb may need tuning

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Stalls when engaging first gear
Check clutch switch may be stuck bike thinks you are putting in gear without pulling clutch
Read full answer
Mar 11, 2014 • Suzuki DR 350 S Motorcycles
1helpful
1answer

The clutch wont diengage
Might be time for a Clutch Slave Rebuild.

Has the Bike sat for many months? Sometimes the Clutches stick together because the oil , like, suctioned them together.
You can start the bike, hold in the clutch and kick it into first gear. It may stall out a few times but usually that will free up the clutches. Careful , the bike will lunge foward as yo kick it into gear
Read full answer
Oct 04, 2012 • 2005 Suzuki Katana 600
0answers

2003 GSX600 Katana clutch will not disengage
Read full answer
Be the first to answer Mar 07, 2017 • 2003 Suzuki GSX 600 F (Katana)
1helpful
1answer

I have a 1991 suzuki GSX600 Katana and whenever I shift there is a rattling noise like the linkagesin the transmission are boucning around or somthing, the shifts sometimes buck as well,
You may have a shift fork or two starting to go bad. When a fork gets bent, it does not move the slider gear properly. When that happens, the slider's gear dogs don't engage fully into the slots cast into the driven gears. A rattling noise occurs. When full engagement happens you get the bucking. As time goes by, the shifting pedal will get harder and harder to shift. Then you simply can't get it into or out of a gear. The bike is 20 years old, parts are getting hard to find. Finding a shop willing to work on it can also be difficult to find. The repair will probably cost between $1000 and $1700. That's pretty much more than the bike is worth. The diagram below will give you an idea of how the shifting takes place. I wish I could give you better news. Please rate my answer. Thanks. tombones49_76.gif
Read full answer
Apr 14, 2011 • 1991 Suzuki GSX 600 F (Katana)
3helpful
1answer

Bike dies when shifted into gear 92 gsx600f
There should be a side stand switch, that when the side stand is down, and your clutch lever is out, the engine will stall.
Read full answer
Mar 29, 2011 • 1992 Suzuki GSX 600 F (Katana)
1helpful
1answer

How do I adjust my clutch cable on 1996 katana, I just changed it and now it wont engage into gear.
It should be set so that there is about 1/2" play at the lever end before it takes up the clutch mechanism. Make sure the lever isn't bent toward the grip which would restrict it's travel. If the lever is made of aluminum and bent, don't try to straighten it when cold--it will break. Heat the lever with a propane torch until fairly hot, then gently do the straightening. Shift the transmission into first gear, pull the clutch, and try to push the bike to test for release. Don't run the engine until it works as described. If this doesn't work, review the installation of the cable. Hope this helps!
Read full answer
Sep 26, 2010 • 1996 Suzuki GSX 600 F (Katana)
0helpful
1answer

I recently bought a 1994 GSX600F Katana, and it slips and grinds in second gear. It also stalls when I try to put it into first. it only starts in neutral, and not in any gear even with the clutch pulled...
sounds like 2nd gear failure,which is motor out and split to repair,go to your dealer and get them to test ride,
Read full answer
Aug 09, 2010 • 1994 Suzuki GSX 600 F (Katana)
0helpful
2answers

Why does my motorcycle stall when I change from neutral to first even with the clutch fully engaged?
This usually means the clutch is going bad or is bad. Does it seem to shift hard when you are normal shifting? You should be able to shift with the lever pulled 3/4 of the way back with no surging or hard shift. I would start with replacing the clutch or having it checked out.
Read full answer
Jul 31, 2009 • 1998 Suzuki GSX 600 F (Katana)
0helpful
1answer

My 89 750 won't shift but will run what could it be if it.s not the tranny?
make sure the clutch is properly adjusted before getting into the tranny looking for problems. many ppl mistake problem shifting with the tranny, but the clutch should always be looked after first.put it in first gear, with the bike off, try pushing bike back and forth while clutch is engaged, it should move freely
Read full answer
Jun 24, 2009 • 1989 Suzuki GSX 750 F (Katana)
Not finding what you are looking for?

View Most Popular

Motorcycles

Related Question

Stalls when engaging first gear

  • Suzuki DR 350 S Motorcycles

229 views

Ask a Question

Usually answered in minutes!

Popular Questions

Need to know which wires hook up the temp sending unit , on a 1992 Gsxr 750

Suzuki GSX-R 750 Motorcycles

What does f1 mean when it flashes where the temp guage is?

2004 Suzuki GSX-R 600

Hav tv

1988 Suzuki Rg 250

How many quarts of oil does the Suzuki VL800 take?

2003 Suzuki VL 800 Volusia

99 1500 intruder how do I check the voltage regulator

2000 Suzuki VL 1500 Intruder LC

Top Suzuki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Sean Wright
Sean Wright

Level 3 Expert

2045 Answers

Bob G

Level 2 Expert

104 Answers

Are you a Suzuki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

PDF Manual
Vl800.pdf. user-manual-2006 Boulevard...

2006 Suzuki...

GIF Manual
Suzuki-gsx550-1987-euh-electrical...

1986 Suzuki GSX 550...

PDF Manual
GSX-R 750 Owners Manual.pdf....

2007 Suzuki GSX-R...

Loading...