Looking for schematics on 1995 ktm 620 lc4 rxc

You might find the manual and wiring here.. http://www.manualedereparatie.info/en/categorii/ktm.html
please rate me if this helps.
Thanks

try replacing the plug and get back to me with results

You're coil may be on it's way out and may need to be replaced. Check all you're ignition cables for wear and tear. It may also be that the bike is running to lean. But you should not try and play with the air fuel mixture a this may have catastophic consequences. You will need to get it done by a professional.

check vale clearins if that fails check statour / pick up . make shour it hasent broke the woodruf key in the fiy wheel

Download a free service manual at the site below. Your manual is 9th on the KTM list. The wiring diagram may be in the manual.

http://www.carlsalter.com/motorcycle-manuals.asp

Please rate this answer. Thanks!

This is for a 2000 400/640 ignition for KTM 640 lc4-e. Looking from the perspective of rider seated on motorcycle we have the following colour coded wires going from left to right.: 1. r/w (red/white) 2. bl (blue) 3. o (orange) 4. g (green) 5. ge (Yellow) .6 g/s. (green/black). Hope this can steer you in the right direction Brisenod. From Flabbycat

Hi and welcome to FixYa,

Initially, pls try here, here or here. In some, the wiring diagram is part of the Service Manual.

Good luck and Thank you for using FixYa. Happy Holidays.

Hi and welcome to FixYa,

It would seem you posted twice, pls try here, here or here. In some, the wiring diagram is part of the Service Manual. If the year is different, most harness/wiring would be relatively similar.

Good luck and Thank you for using FixYa. Happy Holidays.