At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Fixyahttps://www.fixya.com > ... > Daihatsu > Terios
Nov 14, 2019 - The tappet clearance for your Hyundai Atos 2007 would be: ... Valve clearance Warm: 0.2 mm intake, 0.25 mm exhaust. ... Valve clearance Cold: 0.1 mm intake, 0.17 mm ...
The valve clearance specification for a Volvo FL10 truck depends on the specific engine model and year of manufacture. Generally, the valve clearance for the FL10 truck with a Volvo D10 engine should be checked and adjusted as follows:
Remove the valve cover: Remove the valve cover to access the valves.
Rotate the engine: Rotate the engine to the top dead center (TDC) position for the cylinder you want to adjust.
Check the valve clearance: Use a feeler gauge to check the clearance between the valve stem and the rocker arm. The specification for the valve clearance should be listed in the engine service manual.
Adjust the valve clearance: If the clearance is not within the specified range, adjust the clearance by loosening the lock nut on the rocker arm and turning the adjustment screw. Tighten the lock nut when the clearance is correct.
Repeat for each cylinder: Repeat the above steps for each cylinder.
Reinstall the valve cover: Once all the valve clearances have been checked and adjusted, reinstall the valve cover.
It is recommended to refer to the engine service manual for specific instructions and specifications for your particular Volvo FL10 engine.
The valve tappet clearance for the Mazda Bongo Brawny can vary depending on the specific engine model and year. Here are some general specifications for the different engine types:
2.0L FE engine: Intake valve clearance - 0.18-0.22mm, Exhaust valve clearance - 0.28-0.32mm
2.5L WL engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm
2.5L RF engine: Intake valve clearance - 0.20-0.25mm, Exhaust valve clearance - 0.30-0.35mm
It's important to note that the valve tappet clearance should be checked and adjusted by a qualified mechanic using the correct specifications and tools. Incorrect adjustment can cause engine damage and poor performance.
×