Question about Honda Motorcycles
Posted by Anonymous on
Hi, Anonymous for this scenario you will need your service, parts fiche, and owners manual if you can't find the best tool you ever bought for your Honda, despair not, for a mere zero $0 you can download another one. For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
My Honda tmx 155
Honda Tmx 155 Service Manual Free Download
Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e
Posted on Sep 25, 2017
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
The recommended weight is 5 weight oil.
There is a different oil level depending on spring size.
No mark or three on the top end of the spring is 98mm. Max of 137mm and minimum of 123mm.
Two marks on spring is 94mm. Max of 33mm and minimum of 118mm.
Two sets of two marks (Four) is102mm. Max of 41mm and minimum of 127mm.
This is measured from the top of the tube (pushed down to the seal) to the top of the fluid level.
Posted on Sep 10, 2009
SOURCE: how to clean the honda
The main issue is usually the jets get clogged due to gas sitting in the bowl for extended periods. the simplest solution is the remove the carb and remove the bowl and needle and float. Then, if possible, remove the main jet and air tube and also the idle jet (the smaller one ) (remove the jet from the bottom and gently push the air tube out from inside the carb body). Then clean the jets in carburetter cleaner in a glass jar.over night.
Take a piece of electric "zip" chord and strip back the insulation to expose the wiring which is very fine copper . use one of those strands to clean the jet until you can see through it and see no deposits or roughness. do the same for the idle jet. reassemble take care on the air tube because it is likely "keyed" in to a certain alignment.
Posted on Apr 13, 2011
Tips for a great answer:
Oct 25, 2014 | Honda Motorcycles
May 26, 2013 | 2005 Honda CG 150 Titan ESD
Oct 05, 2012 | Honda Motorcycles
Aug 27, 2012 | Honda Motorcycles
Mar 11, 2012 | Honda Motorcycles
Jan 16, 2012 | Honda Motorcycles
Nov 16, 2011 | Honda Motorcycles
Aug 14, 2011 | Honda Motorcycles
May 30, 2011 | Honda Motorcycles
532 people viewed this question
Usually answered in minutes!