By "running lights", if you mean just the rear turn signals, usually from the factory the rear turn signals are just that, as they have only a single element bulb.
So that leaves the tail light and brake light.
Check the bulb (dual element), check the fuse, check wiring.
SOURCE: changed to led from harley and now i have tail light but no brake
Did you check the bulb? and wiring?
good luck!
SOURCE: brake light
front brake lever not depressing brake light button. inside throttle housing or I had a guy the other day thought brake light was stuck on (found burnt fillament brake light)
SOURCE: 82 harley sportster brake light
try starting with the bulb. brake light bulbs are dual fillament, meaning you have 2 bulbs in one basicly. if your brake side has blown then the tail light could still work. Or try checking the brake light switches, one on front brake and one on rear brake pedal. to test switches disconect wires and join them together with small bit of wire or paper clip. this will make the light come on meaning you have a bum switch.
if you have only been using the rear brake, that has an adjustable switch, may need to mess with it
SOURCE: 2008 Harley Davidson CVO Ultra classic and my ABS light stays on
i wouldnt ride a bike with the brake lite on - get it taken care of
SOURCE: 1993 harley sportster 1200 headlight quit working
could be a bad ground in the head light bucket or the jumper from frame to the triple tree
207 views
Usually answered in minutes!
×