SOURCE: Hi, what should be suzuki rmz 450(2005) valve clearance, Thanks
The valve clearance settings for the 2005 RMZ450 when the engine is cold are > Exhaust .006 to .009 > Intake .005 to .007, per the factory service manual.
Please rate this answer. Thanks!
SOURCE: need valve clearance specs for suzuki LT4WD 1989
.10mm intake .15mm exh. @ top dead center comp.stroke
SOURCE: how do you set the points on a 1978 gs 750 suzuki
Two types of points were used on that bike. The ND system (condensers one on top of another) and the KOKUSAN system ( condensers left and right side by side). When ordering parts it will be important to know which system you have. All but one model use the ND system so I will assume you have the ND system.
Go to the site below where you can see a parts diagram for your specific bike. You will select the actual brand, year, model, etc., once you go to the site. Part numbers and prices are also shown. You can order parts from this site.
www.babbittsonline.com/pages/parts/viewbybrandand/parts.aspx
SKU: 31440-36210
POINT ASSY, CONTACT LH B,C&EC,N&EN
SKU: 33172-36210
POINT ASSY, CONTACT RH B,C&EC,N&EN
I could describe how to set the points and timing but it would be better if you had a factory service manual with photos and diagrams. Go to this site and you can download a free PDF service manual.
http://www.carlsalter.com/motorcycle-manuals.asp
It is a 86meg file. It took me about 8 minutes to download. The manual is actually for a 1976 bike but the timing and 95% of all else is the same for the 1998 bike. You now have more information on your bike than you will likely ever need. I suggest you take the file to Kinkos or a similar store and get a two sided printout of the file, 186 pages, 93 sheets. Have them 3 hole drill the sheets and then you can put the sheets in a 3 ring binder for easy reference.
Please consider a top rating on this solution. Thanks
SOURCE: clip-ons to fit a 1978 Suzuki GS 750
If i were you i would not do this mod. You are going to end up with a ugly top triple tree. Rather find a lower set of bars off another bike. They are all the same diameter tubing.
SOURCE: valve clearance 94 yzf 750
valve clearance for a 1994 yzf 750 is .11-.20 in. intake, and .21-.30 in. exhaust
305 views
Usually answered in minutes!
×