SOURCE: how to put brake pads on a 2004 honda vtx 1300
Check on www.youtube.com
Search "brakes" "motorcycle" "replace"
There is a lot of videos showing procedures
SOURCE: I have a 2004 Honda VTX 1300 R. What service is
air filter,oil filter,oil also plugs buddy get back to me buddy if anymore questions
SOURCE: 2004 honda vtx 1300 c stalls out after down
ever drain your carbs ? should be done seasonally . fuel filter problem, sounds like it is running out of gas.
SOURCE: How do I take the stock grips off of my 2004 Honda
Left side .use a set of screwdrivers and insert between thehandle chrome ring and thecaliper assembly.gently andevenly pry the stock handle off.If a lot of resistance is felt put a drop of wd 40 and allow to loosen up the adhesive used by the factory.By the t[me you are half way offthe handle should be able to be twisted off. remember to wipe off the wd before installing new handle.. Right side remove philipshead screws on the throttle manacle[control] open it up like a **** and remove throttle cables from handle.the r. handle will now slide off bars
SOURCE: What type of collant can
Any brand name motorcycle antifreeze should work for you. If genuine Honda coolant is not available to you, you can use GM Dexcool or any NON SILICA style automotive anti freeze. The silica (scrubbing) particles in regular automotive anti freeze will damage the water pump seal ceramic washer causing your pump to start leaking. 50/50 mix should work fine. If you have to dilute the antifreeze to achieve a 50/50 mix, use only distilled water to limit corrosion or crust build up in your radiator.
756 views
Usually answered in minutes!
×