Question about 2005 kawasaki KLX 125

1 Answer

2005 Kawasaki KLX 125 how to replace the clutch

Clutch lining resolution @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • kawasaki Master
  • 60,964 Answers

Hi, Anonymous for this scenario you will need your service manual that has all fastener torque specs and a wiring diagram on the back pages, parts fiche, and owners manual if you can't find the best tool you ever bought for your Kawasaki, despair not, for a mere $15 you can download another one.
For more information about your issue and valuable "FREE" downloads that you will need for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
KLX Clutch Install
How to change clutch on dirtbike HD
Kawasaki KLX125 2003 2006 Workshop Service Repair Manual Download Manuals... $15
OEM Parts for Kawasaki
Kawasaki KLX125 Owner Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e

Posted on May 10, 2018

Ad

3 Suggested Answers

tombones

  • 3567 Answers

SOURCE: type of oil for a klx 125 dirtbike

The gearbox gets 10w40 motor oil.

Please rate this answer. Thanks afiala93!

Posted on Apr 05, 2009

Ad
bazzz7071

bazzz7071

  • 342 Answers

SOURCE: can you adjust the seat height on my kawasaki 125?

No what you can do is take it to some one who does custom seats and discuss having it re done with thicker foam piece raising it to your comfort.

Posted on Jun 01, 2010

Ranach8

  • 21 Answers

SOURCE: 2003 KLX 125: how fast do 2003 kawasaki 125 KLX go...

Should do around 55mph at wot in 5th gear with an averge sized person on the bike.

Posted on Jul 20, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Display flashes horizontal lines


It's not unusual for a monitor to use different circuit paths based on the the display resolution chosen and so, one could have a resolution that is faulty, while another works just fine. Monitors normally just get dim, or power supplies fail, or other more common failures, blank or white dots... etc.; but, should a monitor live long enough without failing in those areas, usually one or more resolutions will fail. Doesn't leave you much of an option, other than a repair shop, if one could be found; but, as long as it works at that or another resolution, and I'd check the other settings and use it if you have something where it can be used. Sorry for the not so good news.

Jul 02, 2017 | AOC I2353PH New

1 Answer

Input not supported error


The native resolution for the x193w monitor is 1440x900. The monitor will only allow certain resolutions. You may need to create a custom resolution using the nvidia control panel.
Goto:
advanced options display change resolution customize create custom resolution horizontal pixels : 1440 vertical lines 900 refresh I belive is either 75 or 60. Whichever looks better scan type: progressive

Feb 22, 2011 | Acer X193W LCD Monitor

1 Answer

I have a Whirlpool Ultimate Care II LSQ7533JQ1 washing machine. It agitates and drains but does not spin. I checked the motor coupling is not worn out nor broken. This is a two speed washing machine. ...


This is a neutral drain direct drive machine which drains the water first prior to spinning. After draining out the water completely, the motor pauses then restarts to spin the tub. It is possible that the problem is in the lid switch. If the motor is running during the spin cycle then the lid switch is good, otherwise it is indeed the problem.

The problem can be either in the brake particularly the cam driver or the clutch assembly. The clutch hub is attached to the spin pinion gear and as the spin pinion gear turns, the clutch hub also turns. The clutch lining is forced against the clutch hub by the clutch spring. As the clutch hub turns, friction between it and the clutch lining causes the clutch lining to turn. As the clutch turns, the tab that holds the clutch spring on the lining, contacts the brake cam driver, releasing the brake. The tab on the clutch lining remains in contact with the brake cam driver, holding the brake released and then providing power to the spin tube through the brake release.
jahn27_58.jpg
jahn27_59.jpg

The basket will not spin if the brake cam driver is broken because the brakes cannot be released. If the clutch spring is weak, the friction between the clutch hub and the clutch lining is not sufficient for the clutch tab to push the cam driver and release the brakes.

Check and replace, if necessary, the brake cam driver and the clutch assembly particularly the clutch spring and the clutch lining.

Dec 30, 2010 | Whirlpool Ultimate Care II LSQ9564J Top...

1 Answer

Monitor Lines


every monitor got its limit of resolution and refrehs rate ..dont exced that ...

set ur resolution 1680 x 1050

Mar 20, 2010 | Computers & Internet

2 Answers

I use a acer aspire 5810TZ and have a vertical line runnng through my screen how do i fix this problem


Well, if this is the same problem I'm having with my 5810T, then the settings have nothing to do with the vertical lines. There are vertical lines on my acer because the framing of the screen isn't thick enough. Thus, the lines are caused by the lack of sturdiness. Changing settings does nothing. However, pushing on the frame on the bottom of the screen adds more vertical lines. Releasing gets rid of some of them. Tapping also helps, but the problem only gets worse with time.

Nov 09, 2009 | Compaq Presario M2000 Notebook

1 Answer

Lines of resolution


Horizontal lines of resolution are 1097.

Feb 13, 2009 | RCA D52W135D 52 in. TV/DVD Combo

1 Answer

I have a sony 32 inch xbr TV (myt first non analog). HOw do you change the resolution from 480i to 1080i. What is the difference between 1080i and 1080p Thanks for your help. Maria


The resolution can only be change on your resolution source (ie cable box, dvd, etc). On your cablebox go to menu/setting->audio/video->output resolutions->and here you can change the setting. The main difference between i and p is how the video is scanned. I is interlaced, meaning you get the odd lines of video, then the even lines, and the picture may flutter but its better for fast action. P is progressive giving all the lines of video at once, better for still images, but slower of some tvs.

Dec 06, 2008 | Televison & Video

2 Answers

How to change the resolution of Acer AL1702Wb 17


On windows XP and earlier :
1. Right Click the desktop
2. Click properties
3. go to settings
4. the resolution slider is there. Try different resolutions untill it looks good.

Feb 21, 2008 | Computers & Internet

3 Answers

Screen output


If connected to the PC, try lowering the resolution. The maximum resolution supported by this model is SVGA compressed (800 x 600). At higher resolutions, I have seen a vertical stripe similar to what you described

Jan 17, 2007 | Sony CPJ D500 Multimedia Projector

Not finding what you are looking for?
2005 kawasaki KLX 125 Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top kawasaki Experts

Arnie Burke
Arnie Burke

Level 3 Expert

6151 Answers

Marvin
Marvin

Level 3 Expert

85223 Answers

ROB

Level 3 Expert

858 Answers

Are you a kawasaki Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...