SOURCE: Rejetting a Yamaha Vstar 650
No it will not. You probably don't NEED to rejet at all. If the manufacturer suggests it for your bike and pipe combination I would follow their advice. If they do not suggest it I would use a dyno to get the best performance from your new setup. Keep in mine your new exhaust only lowers the back pressure. You haven't changed the intake parameters at all as far as airflow. So any additional air going into the cylinders due to your new exhaust will only be because of the reduced volume in the cylinder while the intake valve is open. This is a rather small amount, so don't get all crazy and jump several jet sizes at once.
SOURCE: Which size Jet Kit for 800 Vulcan Classic?
general rule of thumb is to go up about 10 jet sizes,unfortunately it is a bit of trial and error,and you may have to swap out diferrent sizes to get the bike running right,(jets are quite cheap though)but first step about 10 sizes from standard,your local dealer should be able to tell you what jets are in it and supply replacements,if you change to a hgh flow aftermarket air filter you may have to change jet sizes again as changing the filter may effect the mixture ratio in the carbs,,hope this helps
139 views
Usually answered in minutes!
×