Hey On my aprilia mx 125 the left indicator is not flashing and right side I get a crackle noise from flasher before it starts. Also if im honest im not sure were the earth wire is to check
There is a small box coming from you cdi you can also follow the wire from your signal to the box you will have to replace it
SOURCE: indicator problem
The flasher unit is called the TSSM module. It is a combined flasher and alarm unit. A new one will require your alarm keyfobs to be matched to it. An expensive unit if faulty. If you replaced the earth wires and now its blowing fuses, then I would check your work. The fault has changed after you worked on the vehicle so logic dictates you have caused this. The black wire is usually the earth on these indicators but it is a possibility that these are routed through the TSSM module. You might have done damage if this is so.
SOURCE: 2001 aprilia rs125 indicators dont work on left
their sounds like their is a short in the switch or wire.
if i was testing it. id unplug the one side and test the other alone. then each wire individuality for current when i press switch to on position
shorts seem top be visible at times with visual inspection. so look before you touch. and checking the switch for resistance is a good idea also. but do not have the battery hooked up to test switch for resistance or no power to switch when testing.
SOURCE: honda nsr 125 right indicator problem
check for a faulty ground wire/s, or a faulty or lose connection
189 views
Usually answered in minutes!
×