According to most posts the pink wire directly connected to ECM would be the TACH relay to AutoMeter Tach Gauge. 2001 FLHR can anyone reassure me on this one? Thanks inadvance
your spedometer should be hooked up via cable off the front wheel. not through wiring but use your volt meter to ensure the wire coloring didnt change in the makes of bikes
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Who manufactured the tach? Maybe they have a web site and instructions? Did you tach come with instructions?
I looked at autometer instructions for your vehicle, have to use an adapter, it ties into the power wire for your coil pack. The adapter costs about 97 bucks, not including tax.
Different tach manufacturers may have different hook-ups?
The tach wire will be a pink wire under the wire loom leading up to your speedo. It's usually tucked into the conduit. If you don't have it there, then you'll have to run one all the way to the ECM.
your spedometer should be hooked up via cable off the front wheel. not through wiring but use your volt meter to ensure the wire coloring didnt change in the makes of bikes
look to the connection of the tach wire, see if its on the green wire of the coil, if it is, then clean the connection and see if that helps, if it still doesnt work properly you may have a faulty gauge
Locate & route Black lead to ground / 2004-later softail: On the frame strap under the seat directly in front of the battery.
Locate & route the pink lead to Signal / For 2004 & later FXST/C/I The #3 cavity in the connector {39b} on the back of the speedometer. The socket terminal on the signal (pk) lead fits the #3 cavity.
Locate & route the Orange and white lead to power / Ummm.. it's saying for 2004 and later to adapt to the fuse block For earlier [ For 1996 to 2003 softail: locate the power lead (o/w) in the tail lamp pin connector {7a} under the seat behind the right rear corner of he battery.] "here you are looking to run it to a fused line, not directly to power/battery" I hope this helped.
×