SOURCE: has firing but wont start
check if its getting fuel and air, you need All 3 to make it run, if you have all of that (and going on the its firing concept) all that need to happen is fuel goes to carb, intake turns it to vapor, spark plug fires and ignites the fuel vapor and that causes the piston to go, so if its firing and all the above are good you should check the points and condensor, it should turn over for a few seconds and backfire if its not backfiring its likely not getting fuel, try to spray some ether(quik start or just some gas directly into the carb to see if anything hapens, You may need to take it to a shop or have friend with some mechanical background help ya. good luck Rotticus,
p.s. in the future be more specific and we can try to get more details for you, also google the bikes make and model and you should find some schimatics.
SOURCE: 1989 yamaha xjcdi unit has stoped working where
hello, i just purchased a after market cdi from, procom engineering inc. 66 maxwell irvine ca, 92618 usa. tel, 949-748-6338, or www. procomengineering.com, i purchased cdi for 350 warrior,this cdi advances timing, hotter spark, easier to start, i am very pleased with mine, it was 76.00 dollars, this is a aftermarket high performance cdi, beats paying 500.00 from yamaha shop, try it i believe you want be dissapointed, they have warranty with it. check it out, they ship pretty fast too, bubba
SOURCE: cdi unit is there different ones i can use from
You must make sure that any other cdi unit is compatable with your make of bike .Best advice is to obtain the same as fitted on you bike ..check the unit model type rating and output .
SOURCE: Haynes Manual wanted for XJ 600 1991
try e-bay, I get lots of bike stuff there
Testimonial: "Many thanks ... sorted"
337 views
Usually answered in minutes!
×