The modle and year was not on the list of this website so i chose the next closest modle but anyway, i think u might be able to help me
i just bought a new magneto but i am not getting any sort of electrical charge coming from it. the part with the coils inside is well used and may be at fault, but i rebuilt it and re soldered the wires very carefully. i think i have it wired properly but no matter how i wire it i am not getting any electrical charge or spark. i even put my hand on the wire coming directly from the start if the ignition system to feel for an electric charge, but still, no charge. please help
WThat center thing is the armature. It generatates voltage by breaking the magnetic field created by the field coils.. You won't get shocked or even feel the current because you cannot get it spinning fast enough. You have a coil that generates the high volttage spark from the pulsing of the generator output and voltage controlled by the regulator. the field coils are ennergize by turning on the keygetting power from the battery.. n no doubt you did good in your rewire, but the only way to test it is to run it. Yup, reassemble, new oil and start it. Sorry guy.
2,025 views
Usually answered in minutes!
×