Repair master clutch cylinder on a 92 300zx
You should be able to buy a rebuild kit for the cylinder, I would rebuild the slave and master. just take it off, take the snap ring off and remove the piston, make a note of which direction its facing, the new one may come with a piston with the seal aready installed.The cup will have the flare facing forward. Just put the new seal on/ or piston in and reseat the snap ring. The slave is just as easy. then you want to bleed all the air out. Fill master cylinder and open the slave bleeder screw, just let fluid come out until all the air bubbles quit. that should bleed it. If the pedal dosent feel right, you may need to have another person depress the pedal and then open the bleeder.
×