Most likely to be found under the removable casing at the top of the chainsaw. The spark plug will have a black rubber spark plug boot which will identify its location. Remove the spark plug wire/boot to access the spark plug. The boot should just pull off. The spark plug will need the correct size socket to remove it.
SOURCE: will start but will not stay running poulan 2000
Check the diaphragm in the carburetor of each saw for hardness or cracking of the material. This is a common problem with older saws, but easily fixed by replacement. Check the fuel filter within the tank of each saw for being plugged--a problem that occurs when leaving old fuel mix in the tank for long periods. Hope this helps!
1,585 views
Usually answered in minutes!
×