Where does the fuel light connect on a 1986 yamaha xj 700

SOURCE: valve clerance for yamaha xj 650,what is the clerance of exhuse and intake?

xj650(uk) and xj650j
inlet 0.16 - 0.20mm
exhaust 0.16 - 0.20

all other models
inlet 0.11 - 0.15mm
exhaust 0.16 - 0.20mm
set when cold

SOURCE: Need to set floats on an xj 700

with the float bowl off and holding the carb level, adjust the float where it is level and the jet is up enough to seal. float should be set then.

SOURCE: 03 warrior 1700 low fuel light comes on with

you have on ground +

SOURCE: I don't understand my wiring diagram.How does the

Hi and welcome to FixYa,

If the starter relay in your version uses blue / white and red / white wires, then to my understanding, connection would be:

• blue / white - goes to the start switch and is supplied with +12 on starting;
  
• red / white - goes to the starter circuit cut-out relay. This cut-out relay controls whether the starting relay gets a ground based on neutral/gear and clutch lever conditions.
  

SOURCE: Looking to find a gas tank for a 1986 yamaha

I have a tank if you still need one.