Question about 2008 Husqvarna SM 125 S

1 Answer

Service manual 2008 Husqvarna SM 125 S

Service manual @

Posted by Anonymous on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    One Above All:

    The expert with highest point at the last day of the past 12 weeks.

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

  • Husqvarna Master
  • 59,350 Answers

Hi, Anonymous the vast majority of service, parts fiche, and owners manuals on the internet are "FREE" to download and all service manuals contain wiring diagrams in the back pages. The rest usually charge a modest fee of $15 and there is a handful of obscure, rare, obsolete, and very old models that are no longer or never were available and some were never printed in English. The Indian and Philippine markets are usually in E-book format only, for these rare occasions I shall look on eBay and find the cheapest one available. Most of the manuals will cover your exact make, model, and year otherwise one will be provided that comes as close as possible to your bike and will have most of the same info that an exact manual would have. If there is no $ sign after the manual link it is free to download.
To download your manual for viewing or printing please click on the blue links below. Good luck and have a wonderful day.
https://www.manualslib.com/manual/969906/Husqvarna-2006-Wre-125.html#product-2006%20SMS%20125S
https://www.bikebandit.com/husqvarna-motorcycle-parts
http://mybikemanuals.com/husqvarna/
https://bikez.com/motorcycles/husqvarna_sm_125s_2008.php
https://en.wikipedia.org/wiki/Husqvarna_Motorcycles

Posted on Nov 09, 2019

Ad

5 Suggested Answers

6ya6ya

6ya staff

  • 2 Answers

SOURCE:

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Anonymous

  • 2336 Answers

SOURCE: Fuel capacity

10.20 litres (2.69 gallons)

Posted on Nov 10, 2008

Anonymous

  • 46 Answers

SOURCE: service manual and spare part for Huaqvarna SM 450RR/2008

Hi,

All Hushy info can be downloaded FREE from the officiial husky site.
If you struggle, I will e-mail you a copy of all

Jon
dirtbikeservices@gmail.com

Posted on Feb 14, 2009

onewheel282

  • 61 Answers

SOURCE: Where can I purchase a new igintion barrel & key

husqvarna dealer?

Posted on Apr 22, 2010

RaidX

Simon Swales

  • 632 Answers

SOURCE: do husqvarna sm 125 wheels fit any 125 husqvarna

Depending if the ground clearance is the same then yes the wheels should fit another 125 bike, Like Many SM wheels are used on WR and WRE models.

Posted on Jul 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Car will not start in cold weather unless you use something to heat up ecu. Can ecu be purchased preflashed


Sounds as if there is a poor solder/connection within the ECU. Most ECU's need to be installed into the vehicle when flashing is done. Check electrical connections/plugs at the ECU for looseness. Sometimes, just connecting/reconnecting the plugs may correct the problem

Feb 22, 2016 | 2003 Mazda 6

1 Answer

Ecu falt change same ecu after no start


When you change the ecu you must to rewrite the imobiliser key code or you must to buy a second hand one with imobiliser and key

Jul 13, 2014 | 2012 Ford Expedition XL 4dr SUV 5.4L V8...

2 Answers

Ecm fuse problems


Well if you've had your ECM burn and got it changed and the same thing happen again then there might be a pilled positive wire exposed to the body or the chassis of your car touching at some point,my best advice is to trace all positive heavy wires leading from the starter and under the fuse board as well.i hope this helps thanks

Jun 23, 2014 | 2003 Ford F150 Regular Cab

1 Answer

Flashing light #1 on the display of a 2004 recon es Honda atv


How many blinks on the 1st gear light? Here's the code definitions that should be for your quad.

Code 0 (no flashes) - The system is functioning normally
Code 1 (one flash) - Electronic control unit
Code 2 (two flashes) - Shift Switch or it's circuit
Code 3 (three flashes) - Angle sensor or it's circuit
Code 4 (four flashes) - Gear position switch or it's circuit
Code 5 (five flashes) - ECU motor circuit (defective ECU)
Code 6 (six flashes) - ECU failsafe relay circuit (defective ECU)
Code 7 (seven flashes) - ECU voltage converter circuit (defective ECU)
Code 8 (eight flashes) - Angle sensor, control motor, ECU or circuit
Code 9 (nine flashes) - Angle sensor, it's circuit or ECU
Code 10 (ten flashes) - Pulse generator or it's circuit
Code 11 (eleven flashes) - Speed Sensor , it's circuit or ECU
Code 12 (twelve flashes) - Gear position switch, it's circuit or ECU

I hope this helps you out.

Oct 08, 2013 | ATVs

1 Answer

R 15 missing while accelerating with Daytona ecu


Hi, Anonymous for more information about your question and valuable "FREE" downloads that you will need please click on the links below. Good luck and have a nice day.
http://www.daytonaindonesia.com/customer-support/ecu-software---program-download/6
Daytona Android ECU Calibration
Yamaha YZF R15A Owner Manual
OEM parts for Yamaha
Yamaha YZF R15 Service Manual

Btw, I’m available to help over the phone in case u need at https://www.6ya.com/expert/gregg_c0ec1df182c7330e


Nov 23, 2012 | 2008 Yamaha YZF-R15

1 Answer

ECU


Hello
Try these links.
www.tyresmoke.net/forum/audi.../7324-how-reset-ecu-correctly.html
www.hondaclub.com/forum/.../208-ecu-resetting-performance-6.htm...Cached
www.youtube.com/watch?v=RUhHiJgsmAg
www.nicoclub.com/.../g35-how-to-reset-ecu-throttle-pedal-release-idl...Cached - Similar
www.youtube.com/watch?v=Y1sVpHClhXs

Feb 27, 2012 | Toyota Cars & Trucks

1 Answer

I have a 1997 328 ic that has a check engine light on I bought a code reader but all it tells me is the code and the problem I don't know how to fix it the codes are 41 camshaft sensor and f-6 which is...


check for a wet ecu

the ecu compartment is under the windshield on the passenger side on E36

you gain acess to it under the hood....
this compartment gets wet, the ecu lays on a flat surface in that
compartment.

the bottom side of the circuit board gets wet and starts corrosion.

remove the ecu, take the bottom plate off, clean the bottom of the circuit
board with alcohol and a soft tooth brush.

you should be able to see the signs of corrosion or conductive build up.

this gunk bridges solder points doing all sort s of wierd things to your
car, including false sensor readings from asc/abs controllers and other
sensors....

all the way to engine failure and worst case burnt and shorted wiring
harness.

I'm on my 3rd ecu, took me and the repair boys a few years to figure this
one out.

BTW: i would get that ecu mounted above that flat surface, use some sort
of standoff to raise it so that it is not laying in the wet.

Nov 24, 2009 | 1997 BMW 328

1 Answer

Instructions for replacing 1997 Jeep Wrangler 6cyl


Its an easy job! Disconnect the battery first! That's very importand! Then disconnect the wiring pack from the ECU. Some models are equipt with snap-systems, other with a screw-system to remove the wiring connector from the ECU. If done, there are three or four screws that hold the ECU in place with the body. Remove the screws and you hold the ECU in your hands. To buy a new or rebuilt ECU, reffer to the numbers shown on the label at your Wranglers ECU in combination with the V.I.N. To connect the new ECU with the wiring pack, be careful with the connector! You need to put him in the right position to connect with the ECU. Do it slow and make sure the connector fits to all points. Otherwise you'll bake some contacts inside the connector.

Oct 23, 2009 | 1997 Jeep Wrangler

1 Answer

My 200 honda recon first gear light is blinking and engine wont stay running


How many blinks on the 1st gear light? Here's the code definitions that should be for your quad. Count the flashes and look it up here. Call your dealership or local repair shop for more info and parts if you're planning on tackling it yourself.

Code 0 (no flashes) - The system is functioning normally
Code 1 (one flash) - Electronic control unit
Code 2 (two flashes) - Shift Switch or it's circuit
Code 3 (three flashes) - Angle sensor or it's circuit
Code 4 (four flashes) - Gear position switch or it's circuit
Code 5 (five flashes) - ECU motor circuit (defective ECU)
Code 6 (six flashes) - ECU failsafe relay circuit (defective ECU)
Code 7 (seven flashes) - ECU voltage converter circuit (defective ECU)
Code 8 (eight flashes) - Angle sensor, control motor, ECU or circuit
Code 9 (nine flashes) - Angle sensor, it's circuit or ECU
Code 10 (ten flashes) - Pulse generator or it's circuit
Code 11 (eleven flashes) - Speed Sensor , it's circuit or ECU
Code 12 (twelve flashes) - Gear position switch, it's circuit or ECU

I hope this helps you out.

Jun 04, 2009 | RTO 200cc Full Size Four Wheeler ATV

Not finding what you are looking for?

Open Questions:

0 Answers

FZR 400R Deltabox Exup. wont idle properly Howzit everyone. I have a "small" issue with my FZR 400R Deltabox Exup. So it doesn't want to idle properly(the moment I reduce the idle speed to any point below 3000rpm it continues to drop and dies) and also revving the bike it bogs around 6000rpm doesn't go any higher. When restricting the airflow through the airbox it revs better(all the way to 14k rpm) but still doesn't want to idle as the revs then hang on it's way down. I suspected this was all caused by an air leak somewhere, sprayed some quick start on the boots between the carbs and the intake as well as between the airbox and the carbs with no jump in the revs. Nevertheless I sealed the boots just to make sure they aren't the problem. I then stripped the carb and cleaned it properly, put everything back together, sorted out their syncing and reset the mixture screws to 3.5 turns out(which sounds a bit far out, but thats what the manual said-since then I've tried everything from 0.5 to 4 turns out with no significant effect). Then the cylinder started acting up(not firings- a different cylinder about every third time the bike was started) I then replaced the spark plugs with new ones(NGK cr9ek as per the manual) after that cylinder 1,2 and 3 was firing, but 4 was still dead. I Replaced the coil, leads and caps, still not firing. I checked the compression, which was fine, I checked the valve clearance (cylinder 4 the one intake valve was way out of spec, so i replaced the shim), still not firing. I've got no idea what else could be the problem or what to check next. PS. When i pulled the spark plugs(both new and old) they where burnt black so I'm not sure if my jetting could be out of spec perhaps?

Nov 20, 2019 | SPEC Motorcycles

See all 2008 Husqvarna SM 125 S Questions

2008 Husqvarna SM 125 S Logo

Related Topics:

39 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Experts

Arnie Burke
Arnie Burke

Level 3 Expert

5962 Answers

richard libby

Level 2 Expert

209 Answers

Joshua Jennings

Level 2 Expert

85 Answers

Are you a Husqvarna Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...