Rear of motorcycle too low
SOURCE: how do I adjust the rear tire on a 97 honda cbr 600f3
40mm slack up and down middle of chain. not tight when sitting on bike. loosen axle ajust both sides evenly, retighten axle install new split pin
SOURCE: rear height of r15
you have increased the width of the tire only 5mm on the sides, all you need to do is to trim the mud guard down just enough to clear the tire and still work as a mud guard. if you were to install a longer shock you would change the geomerty of the machine making it harder to sit (higher) on and ride in the leaned over position seat no longer flat but leaning down hill to forks
SOURCE: I misplaced my ktm adjustable rear set manual, how...
the gear shifter and the brake pedal should be set even with the footpegs.. the same height so when you rest your foot on the peg it should be right on top of each.. hope that I could help
SOURCE: I have a 93 cbr 1000f and was wondering if the
the 1987 and 1988 had 3 adjustment 1 2 3 or soft ride a medium ride or rigid sports ride. i dont know if the 93 has the same setting but it should be the same idea high being sport low soft or touring hope this helps
SOURCE: How to adjust the rear
You will need a spanner wrench it will fit in the slots in the spring. turn the spring clockwise and that will stiffen up the spring and add a little lenth. I hope this helps you .
36 views
Usually answered in minutes!
×