When I start the engine, within 5 min, I get an F1 alarm intermittent (with no impact on driving). I stop the engine and restart it. The alarm disappear and don't come back. Any idea what it means?
SOURCE: F1 display and alarm will not shut off
hi there,
can you tell me the model # on your stove please?
SOURCE: F1 Alarm @ rinse cycle
F1 code = Primary Control Failure. Replace the machine/motor control assembly. If you use a screw driver in front of the machine to open the top you will find a repair manual on the inside of the front panel. or depending on the model, you can even unscrew the bottom and find the manual.The manual inside is actually meant for technicians.It contains the error codes and instructions related to them.will be looking forward for your comments if there is any further problem in this.
SOURCE: F1 error code on Kenmore Oasis He
Moister can get in between the contacts,is it in a high moister environment? Try using a hair dryer on the panel to dry it out.Also unplug it to reset.
Hope this helped.Let me know by rating me
For more help go to live chat.
lenwest
SOURCE: whats is the f1 code mean on the dash
Go here and read the forum: http://www.gixxer.com/forums/showthread.php?t=174828
SOURCE: F1 display and beeping
F1 Power to element relay energized during time of day display.
1. Wiring harness shorted.
2. Or change power relay board (PRB).
Note: for double ovens, change second oven board.
159 views
Usually answered in minutes!
×