14mm head bolts need torque setting psi?
SOURCE: Torque setting
Ok, lets see- I still have my old official shop manual for that bike...Cylinder head nut torque is 16-20 ft lbs,Cam sprocket bolt torque is 12-17 ft lbs, Valve adjuster cover torque is 7-10 ft lbs, Cyl head cover torque is (6mm)- 7-10 ft lbs (7mm) 9-12ft lbs, Rocker arm adjuster nut torque is 11-13 ft lbs.
SOURCE: 2006 vtr sp2{rc51} basic fork,suspension settings if you can help
Download the service manual form here for stock suspension settings
SOURCE: head bolt torque settings
This is for the 10 main bolts, yes?
51Nm or 38 ft-lb.
the two 8mm flange bolts are 24NM /17 ft-lb
SOURCE: VFR 400 front disc bolts torque setting?
there is a tool that will replace the threds in the striped out holes its called a hellecoial? tool its kind if a spring that winds its self into the old threds there ok on plug holes but for brake disks hmmm??? dont know about that! i would get a new wheel, and i think 20nm it far to tight as well, they only need to be niped up tight, not done up with a wacking big bar!
SOURCE: honda CBR125 torque head bolt settings
any honda dealer can obtain that information and give it to you over the phone
Testimonial: "Thanks I phoned and its 29n.m for 4 main studs thanx!"
239 views
Usually answered in minutes!
×