View 2010 street bob rear axle assy - 2006 Harley Davidson FXDBI Street Bob

Question edited for clarity.

In the link :>D

https://www.google.com/search?q=2007+Harley+Davidson+Street+Bob+rear+axle+schematic

..

In my day, we only used torque wrenches for cylinder heads. Axle nuts are just done tight with a standard socket bar.

Rear axle nut torque for an 09 Dyna is 95-105 ft lbs.
Don't know for sure if they are the same size rear axles in 08 and 09 but I believe they are the same.

https://www.google.com/search?q=Axle+nut+torque+2020+street+bob

..

Duplicate question already answered

I'm thinkin' 60 foot pounds is sufficient.

I believe 60 pounds is good

You can download a manual cheap on this site then you will have all the info you need check it out
http://harley-davidson.service-manual-download.com

Get hold of a service manual OR go to dealer and ask for photocopy of the relevant parts breakdown picture page.

Right side you have axle going through swing arm into a short spacer, through right wheel bearing, internal spacer, left wheel bearing out the left side through a longer spacer, and then the swing arm and then on the axle you will have a washer, cone nut and an "E" clip. Inside the swing arm ends you have the belt adjustment pieces that normally would not come out of the swing arm ends. And of course on the right side you would also have the brake caliper mounting and support arm.